0
What else can I help you with?
During electroplating the item to be plated?
The item to be plated should be attached to the negative terminal of the battery.
What is an oxidising electrode?
according to me anode should be oxidizing electrode as oxidation reaction takes place on anode
When the active electrode is not in use it should be placed in the?
When the active electrode is not in use, it should be placed in a designated safety holder or electrode stand to prevent accidental contact and ensure it remains sterile. This helps to minimize the risk of electrical shock and maintains the integrity of the electrode for future use. Always ensure the holder is stable and free from contaminants.
What is the proper amount of arc length when welding?
A rule of thumb is - the arc length should be the same as the diameter of the electrode. 3/32" electrode = 3/32" arc length. 1/8" electrode = 1/8" arc length etc. The thicker the electrode coating the shorter the distance from the end of the electrode to the work. Drag rods are contact rods. E-7024 is one.
From a legislative point of view should the seller always notify his customers whether the gold is plated or no?
Yes there should always be a disclaimer stating ththe piece is not real gold and that it is plated.
Should you say Attached are the reports or Attached is the reports?
attached are the reports
What Pokemon should you add to your Pokemon Red team?
you should add flygon,wailord,ninjask,gardivor,electrode
Should you rinse the pH meter between readings?
The electrode must be carefully rinsed.
What should be attached to the primary Y port in an IV set up?
Piggyback IV should be attached there.
Is silver plated jewelry stamped?
The stamp SP should appear on most silver plated jewelry. Its designation may be hard to read without magnification tools.
Why KCl saturated with AgCl is used in Silver Silver chloride electrode?
KCl saturated with AgCl is used in the Silver-Silver chloride electrode because the presence of AgCl helps maintain a stable potential and ensures reproducibility of the electrode. The AgCl layer also provides a constant concentration of Ag+ ions at the electrode surface, which is essential for the electrode's performance in electrochemical measurements.
How should the values found using the zinc electrode as a standard compare with those based on the standard hydrogen electrode?
Perhaps a rephrasing of the question would help; I've never seen a hydrogen electrode so I don't know how it compares to zinc. The process being done would probably also help (are you electroplating or separating oxygen from hydrogen or ...?), as would the solution the electrodes are immersed in (does the solution react with zinc at room temperature, is it being used in a gas, ...?)
