check if theres power to brake switch feed check wireing digram for correct wires as if fitted with cruise control more than one connector orange /white shuold be brake wires orange shuold be power white should go to indicator stalk use test lamp tosee if when brake pedal is pressed power goes through switch and white wire is powered if so next to check is indicator stalk wireing power goes up white wire to stalk across two contacts back down green/yellow wires to brake lights hope this helps dave.cop 78 79 85 91 caprice owner
First check the brake light fuse, if good, then test the brake light switch.
Possibly defective or misadjusted brake light switch.
Check the brake light switch on the brake pedal. Might have to replace it.
Should be just up above on the brake pedal.
check all brake bulbs a filiment may have shorted out
You will need to remove the tire and wheel from your 1992 Chevrolet Caprice Classic. Remove the brake shoe spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
the brake lights are on a separate cuircut,if your brake lights are staying then it will be a fault with the brake light switch. the switch is located under dash,and will be on or very close to brake pedal.
there are several conections on b/switch if your looking at the right ones one should be batt feed pos outher should go to steering column conector toindicator stalk
brake light plunger switch on the brake pedal maybe faulty, remove it and connect the two wires together and pull apart and see if lights go on and off
The same thing happened to me. It's the brake lights switch either under or over the brake pedal. The same thing happened to me. It's the brake lights switch either under or over the brake pedal.
Check the upper end of the brake pedal under dash
The brake lights on a 96 Jimmy are operated by the brake light switch, mounted on the brake pedal assembly. If the switch is bad the lights could stay on or off, or be sporadic.