It would connect to the serial port interface of a router.
Universal Serial Bus (USB) plugs and sockets are a standardised way to connect equipment such as printers, scanners, cameras etc. that you may wish to add to your computer. The manufacturer of the equipment you are adding will usually include a suitable USB cable with their equipment. If no USB cable is included with the equipment they can be purchased from most electrical/computer retail outlets.
It's a cable used to connect from a Cisco router's DB60 serial port to a telecommunication company's equipment which provides you with a data link.
You can not only the cable company can manage it with special equipment
Usually, nowadays, by using an USB cable or by wifi (wireless). A serial or parallel cable connection is less used except on much older printers.
How can I configure straight through cable?
serial cable
port
a serial interface on a router is basically used for WAN communications. we generally connect to other routers through internet using serial interface. In a lab scenario we generally emulate WAN connections by connecting the serial interfaces of the routers using a cable called DCE/DTE cable.
The type of cable used to connect audio video equipment will be dependent on whether or not one is using HD or not. If one is using HD equipment, then an HDMI cable can work. If not, then look for an S-Video cable. A local Best Buy can personally help one in their decision.
Yes and no. They are often connected to network controller cards. However, many do connect to USB sockets too. Most cable modems have cables for both types of sockets.
To link 2 computers you should have cross cable. Because Serial cable is user to connect 2 or more dissimilar devices. To connect 2 similar devices like computers, Hubs, Switches you should use Cross cable only.In Serial cable 4 pairs of cables are their, 2 pairs for Transmitting and 2 pairs for Receiving the Data. If you use serial cable to connect 2 computers, Conflict will happen while sending and receiving the data. In cross cable 2 pairs of cable will be in a different order so conflict won't happen. So use Cross Cable while connecting 2 similar devices.
You need a special adapter that usually run $17.