Want this question answered?
Indirect Hot Water System.
A smoke test has to be donePeppermint test much less costly
you measure your distance from where you want your pipework to start and finishing multiply the distance by 1.414,when you get your answer you subtract the centers of your 45 degree fittings this will give your travel between your fittings
on internal cold water supply pipework is wrong answer
The alternator is below pipework and fittings and will take a long time to remove - according to my mechanic. Going to do it myself even though it will take me even longer!
That depends upon where it is located. If underground you first have to make sure of the exact location of the leak. Then you have to get to it. If at the pool equipment pad then remove the leaking pipe or fittings and replace them with the same materials.
shortened version of type of steel pipework, found in power plants in boiler area
number of elbows in the pipework
the number of elbows used in the pipework.
No. Camera bodies are manufactured with a variety of lens fittings and only accept lenses with a compatible connector.
Depending on how many bars of pressure you are talking about and where you live in the world. But generally, copper or galvanised are good options and be sure to use copper compression fittings on the outside and solder joints on the inside if using copper piping.
Yes. the voltages will be compatible. Though in North America it will probably be hard to find 220 volt rated lighting fittings as the common voltage rating for lighting fixtures is 120 volts.