Ether
'This line is filled with ether gas, so if you have ever broken or cut one and get a funny smell or some white fluid on you, don't worry, it is not harmful'.
Water pump is the best example
Viscosity is the resistance offered against shear force by a fluid.
A pump is a mechanical means of moving air , or fluid.
Mechanical Seal barrier fluid is the media used for the flushing of mechanical seal faces. The heat generated (because of physical contact and friction) between a pair of mechanical seal (Normally one face rotary whereas the the is stationary) faces is being carried away by the barrier fluid which is being recirculated after proper cooling. The barrier fluid also create a barrier between the process fluid and flushing fluid. It is being kept at a higher pressure than process fluid in order to always ensure that only barrier fluid film remain across the seal faces all the time. The barrier fluid is being kept in a container with connected piping from mechanical seal inlet and outlet. There is normally a cooling device (Air cooler or conventional water cooler) in between for cooling the seal outlet barrier fluid. Liquids being used as a barrier fluid in cases of liquid sealing. Where as gases being used a barrier in case of gas sealing. The barrier fluids are being recommended considering the various check points being given as a guide line in API 682 3rd edition. ( See the details in the subject API plan 53 & 74 barrier fluid selection). Thanks.
According to project lead the way engineering curriculum, the four basic components of a fluid system are a tank to hold the fluid, a pump to drive or pressurize the fluid, valves to control the flow, and actuators to convert the fluid pressure to either lineal or rotational mechanical movement.
fluid entering the capillary
An increase in capillary pressure will shift fluid into or out of the capillaries
Osmotic pressure is what draws fluid back into the capillary from the tissues.
water and waste will move in capillary . water and waste will move in capillary .
The capillary cell wall receives blood from the interstitial fluid.
exchange of fluid that occurs across the capillary membrane between the blood and the interstitial fluid. This fluid movement is controlled by the capillary blood pressure, the interstitial fluid pressure and the colloid osmotic pressure of the plasma. Low blood pressure results in fluid moving from the interstitial space into the circulation helping to restore blood volume and blood pressure.
At the proximal end of capillary, you get the fluid out in the tissue fluid due to blood pressure. At the distal end of the capillary, you get back the tissue fluid due to oncotic pressure of the blood proteins.
Yes, btw peritubular capillary and tubule/duct
By the process of ultra-filtration. At the proximal end of the capillary, you have pressure of about 30 mm of mercury. So the fluid leaves the capillary and enter the interstitial compartment. At the distal end of the capillary the pressure is about 15 mm of Mercury. The fluid in drawn in due to oncotic pressure at that end.
interstitial fluid
Coroid Plexus
net osmotic pressure