0
What else can I help you with?
What would be the voltage suplied to each circuit if three circuits are connected in parallel with a power supply of 30 volts?
30 volts.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
A circuit has an applied voltage of 100 volts and a resistance of 1000 ohms What is the current flow in the circuit?
A circuit has an applied voltage of 100 volts and a resistance of 1000 ohms. The current flow in the circuit is 100v/1000ohms which would equal .1.
What is the curren in an ac circuit with 120 volts and a 60 watt light bulb?
You want to know how many amps in that circuit. To do so, divide the Watts by the Volts. in your case it would be 60 watts / 120 volts = 0.5 Amps.
Would the amperage on each leg of a 230 volt line be added together for total amps the end user is using?
If you had 230 volts on each legs of a power supply that would be true but it is more likely that you are dealing with a circuit that has 115 volts on each leg and the total is 230 volts across both legs. The Power meter on your house supply line will measure and record all aspects of the currents being supplied to the breaker panel.
How many amps in 6kW on a 240 volt supply?
To calculate the amperage in a circuit with a power of 6kW on a 240-volt supply, you can use the formula: Amperage (A) = Power (W) / Voltage (V). In this case, the amperage would be 25A. This calculation is based on the relationship between power, voltage, and current in an electrical circuit, as defined by Ohm's Law.
What does 1500 watts equal in amps at 120 volts?
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
Is a 24VDC power supply short-circuit protected?
That would depend on the power supply.
Can you use 5 volts 1.2 amp power supply on 5 volts 3.0 amp device?
No you can not. The power supply output of 1.2 amps is under sized. You would need to have a power supply of 3 amps or larger.
If 3 1.5 V cells were connected in series what would the total voltage of the circuit be What about in Parallel?
4.5 volts in series; 1.5 volts in parallel.
How do you find the current draw of an electrical circuit if you do not know the voltage and wattage of the device?
Basically if you know the Voltage supply and the power used by an appliance then you use the formula for power which is Power = Volts x Amps. Rearrange so Amps (current) = Power / Volts If power was 2400 Watts and Volts was 240 the Current would be 2400 / 240 = 10 Amps
How is the voltage of the power supply for a series circuit calculated?
The circuit by itself doesn't determine the voltage of the power supply. If there's some additional requirement that goes along with the circuit, such as "The current through the circuit must be XYZ amperes.", or "The voltage across the third component from the north end of the circuit shall be ABC volts,", then that requirement would dictate the power supply voltage. But in order to calculate it, you'd need the knowledge of every component in the series circuit.
