answersLogoWhite

0

To calculate the amperage in a circuit with a power of 6kW on a 240-volt supply, you can use the formula: Amperage (A) = Power (W) / Voltage (V). In this case, the amperage would be 25A. This calculation is based on the relationship between power, voltage, and current in an electrical circuit, as defined by Ohm's Law.

User Avatar

ProfBot

8mo ago

What else can I help you with?

Related Questions

How many amps will a 240 volt single phase 15 kva generator supply?

62.5 amps


How many amps into 240volt?

There are zero amp into or in 240 volts. These are two different entities. A load needs to be connected to the 240 volt supply and then the amps will flow in relationship to the resistance of the load.


How many amps in a kilowatte?

at 240/50 volt itequates to 4amp


Does 120 to 240 volt equal 20 amps?

no


How many amps does a 3000w inverter 240 v draw from a 12 volt system?

It would be at least 250 amps, maybe 300 amps.


How many amps is 6kW 240 volt single phase?

The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.


How many ampere in 240 volt with 100 watts bulb?

Current (amps) = power (watts) / voltage = 100/240 = 0.42 amps


How many amps for a 9000 BTU 240 volt aircon?

A 9000 BTU 240 volt air conditioner typically draws around 5-6 amps. It is recommended to consult the manufacturer's specifications for the exact amperage rating.


How many amps does a 240 volt 1500 watt electric base board heater use?

To calculate the amperage for a 240-volt, 1500-watt electric baseboard heater, you can use the formula: Amps = Watts / Volts. For this heater, it would be 1500 watts / 240 volts, which equals 6.25 amps. Therefore, the heater uses approximately 6.25 amps.


What is the amperage of a 40 va 240 volt by 24 volt control transformer?

The formula for amps is I = W/E. Amps = 40/240 = .17 primary amperage. For the secondary amperage I = W/E. Amps = 40/24 = 1.7 amps.


A 240 volt single phase circuit has a resistive load of 8500 what is the net calculated current to supply this load?

Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 240 volts / 8500 ohms = 28 milliamps


7200 volt 25kw transformer how many amps at 240 single phase?

The formula you are looking for is I = W/E. Amps = Watts/Volts.