220 3m its a finer sand paper you can take the paint as low as you want with it it works great. You should always prime over a 220 grit scratch. It is the perfect size grit. If you are sanding primer so you can apply topcoat, finish with 400grit dry on a machine (DA) or 500 wet sand for a solid color enamel. Basecoat products, particularly metallics and pearls, need to be applied over a substrate that has been wet sanded with 600 grit.
If you are trying to get through the clear and paint to the primer, you should use a 400 grit wet sandpaper followed by 800 grit. It may take some time, but if you use a rougher grit without going back over it with increasingly smaller grits, you will see the scratches from the rougher grit through the paint job.
If you want to remove the primer completely, you should use a 60 grit sandpaper. If you want to smooth out imperfections in the primer you should use between an 80-120 grit sandpaper.
when sanding it down you should start with a lower number(rougher grit) and move to a higher number like 600-800. the higher number is, the smoother it will become.
on what
abrasive grit, probably used in sandpaper
320 grit
I would use a fine grit like 220 or so.
400 grit sandpaper, before sanding melamine wash the surface with TSP soap and the rinse with water to remove any TSP residue
I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to. I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to.
After primer is applied, use 220-grit sandpaper for a smooth surface. Change sandpaper frequently, and wipe the primer down to remove dust. Vacuum the floor to remove the dust, and keep it from flying back up onto the primered surface.
you can put primer on scuffed surfaces. but really its a waste. if you scuff the paint with 320 grit sandpaper thats all you should need . unless you sand down to bare metal then you can hit it with primer
abrasive grit, probably used in sandpaper
320 grit
24 grit
You can reduce the weight of a cricket bat by using sandpaper. You can use 100 or 80 grit sandpaper to sand the bat down.
Answer: I would start with a 400 grit sandpaper then a 1500 grit sandpaper then I would use a paste car wax to get a nice shine.
You need a fine grit sandpaper to clean untreated softwood floor. Use the fine grit sandpaper to gently clean the wooden surface as the dust is wiped away. This procedure should be repeated until the stain is no more.
The higher the number code printed on the back of all sandpaper the finer the grit. With a little practice you can begin to understand what grit is appropriate for any given job. For instance, I refinish hardwood floors and it requires three courses of sanding. To help quickly remove an old finish from hardwood floors I start with a very course #20 sandpaper. It is so rough that it removes a large amount of material pretty quickly. Then, when I have sanded the floor down to bare wood I "step up" to 60 grit sandpaper. Once I've gone over the entire floor with the 60 grit I "step up" again to the finer 100 grit paper. When refinishing wood floors or furniture it is necessary to use several courses of sanding to help remove the deep scratches created by the rougher grits of sandpaper. I hope this helps. John
You would not use sandpaper. You would use a screen. The sanding screens usually come in an 80, 120, and 220 grit.
Grit refers to the fineness of the sandpaper. Depending on the application for which you wish to use the sandpaper, choose the correct grit size. Example, general finish for timber flooring or fine finish for coffee tables etc.
Go over the door lightly with 100 grit sandpaper. Apply a coat of interior/exterior primer. Then you can apply any paint you desire.