Any attempt to use an already existing address on a LAN will be rejected, and the second or succeeding system will have their address set to 0.0.0.0.
Duplicate addresses are not allowed in a LAN; the addresses must be unique.
All IPv4 IP addresses can be divided into two major groups: global, or public, or external - this group can also be called 'WAN addresses' — those that are used in the Internet, and private, or local, or internal addresses — those that are used in the local network (LAN).
LAN users get access to internet or can communicate with others LAN connected to WAN.
ARP is a protocol that maps MAC addresses to IP addresses for packet delivery and for finding out which device in a LAN has a given IP address.
Routable addresses is a type of IP addresses which can be accessed outside of your network. For instance, 192.168.*.* is not routable and can be accessed only within your LAN. From another side 66.294.91.104 is google's IP address and can be accessed not only within google's LAN but also from any point of Internet (WAN).
To uniquely identify a node on a network and to allow the transfer of frames from source to destination
private ip addresses
we have assign two ip address in one lan card. first we put the lan card in DHCH mode Then highlight the alternative ip address block, give their manual ip address.
The subnet mask must be the same for all devices in the same LAN segment. The IP addresses must be unique (different). Also, the default gateway address is usually the same for all devices in the same LAN segment.
It can improve the LAN performance.
It's being reset too.
then the organisms wont be able to help the lan (tundra!)
This happens because it clears the Line, Reboots the lan connection and give you a good IP address.