When you put a light bulb in series with a inductor, the inductive reactance of the inductor reduces the current available to the light bulb, making it less bright.
For this effect to be noticed, however, you need a very large inductor. To cut the current in a 60W bulb at 120VAC/60Hz by one half, for instance, you need an inductor around 0.6 henrys.
the light bulb gives off more light
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
it should become dimmer
You need a Battery, Light Bulb, Ammeter, Switch.
the light bulb gives off more light
If you unscrewed any bulb in the circuit it would turn all of the bulbs off.
In that case, the entire circuit won't work.
The circuit will have the flow of electricity interrupted.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
The light bulb was invented by Thomas Edison which started out as a series of mistakes
when a light bulb is switched on it will blown..............
A light switch is in series with the light bulb it controls.
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
it should become dimmer
When a light bulb burns out it no longer makes light. This is because there is no way to connect the flow of electricity.