0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you wire 6 batteries?
Depends on if you want a series or parallel circuit. In a series circuit if you wire six 12 volt batteries together you will end up with 72 volts. Wire the same six 12 volt batteries together in parallel and you will still have 12 volts. In a parallel circuit you just wire all positive posts together and all negative posts together. In a series circuit you would wire positive to negative to increase the voltage with each battery added.
Is there a voltage carrying limit of wire?
Yes it depends on many variables such as what the wire is made of the size of the wire whether the wire is a multi strand wire. What governs the amount of voltage a wire can carry is the insulation that is wrapped around the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation is tested to destruction. The label that is given to the wire insulation as a result of the tests is the highest safest voltages that can be applied to that particular type.
Why and how does insulation depend on voltage?
Where you find wire insulation with ratings of 300 volts, 600 volts and 1000 volts, these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation on a wire is tested to destruction. The label that is given to wire's insulation, as a result of the tests, is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply.
How many watts can 110 wire carry?
The first thing we have to do is clarify between the two items. 120 volt wire rating is an insulation rating of the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, equipment is tested to destruction. The label that is given to wire as a result of the tests is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply. The ability of a wire to carry current (amps) is related to the size of the wire. Now, watts is the product of amps x volts. To answer this question, assuming the supply voltage is 110 volts, an amperage needs to be stated as per the formula above.
Can you get 220 volts from 90 volts?
A single phase meter will have two "hot" wires, one black the other red. Each wire will carry 120 volts. Essentially these two wires together will provide you with 240 volts. Hire a professional when dealing with electricity.
Why when you turn off and on again your car you loose the radio channels ant the hours of the clock?
Its because your 12v memory wire, usually yellow on aftermarket stereos, isn't holding 12 volts, which you need to find an alternate wire that is 12 volts with the key on or off and u can usually find this in the fuse box, this usually happens when u connect the yellow and red wires together when installing an aftermarket radio
How do you add a neutral wire for 220 volts?
Standard wiring for 220 volts which is also referred to as 240 volts, commonly has four wires. One is red, one is black, one is white and one is a bare copper wire. The red and black wire carry 120 volts each, the white wire in usually your neutral which hooks up to your ground along with the bare wire.
Can you run a 60 watt light bulb on a 300 volt wire?
If your light bulb voltage rating is under 300 volts then yes it can use 300 volt wire. The voltage rating of the wire is the maximum voltage that the wire can safely carry. The three common insulation groups is 300 volts, 600 volts and 1000 volts.
How do you wire a wire to a wire?
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
Can a 125 volt cable power a 120 volt piece of equipment?
The first thing we have to do is clarify the question. A cable rating of 125 volts is an insulation rating of the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, equipment is tested to destruction. The label that is given to wire as a result of the tests is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply. So to answer the question yes, the 125 volt insulation rating on the cable can be used to supply a source of 120 volts to a 120 volt rated piece of equipment.
How much volts can you run thur 6-3 uf wire?
600 Volts
How many volts a 2.00mm wire can have a maximum load?
The voltage that a wire can have suppressed upon it is governed by the rating of the insulation that surrounds the wire. Common insulation voltages are 300, 600 and 1000 volts.
