Enclosed within the iron base is a coil , somewhat like the coil on an eleritic stove . the coil heats the base and water tank on a steam iron . The iron also contains a heat regulator to control ironing temp.
By plugging its cord into an electrical socket.
Do not remove any electrical plug by grabbing the wire. This weakens the connection at the plug. ALWAYS grab the plug itself when removing it.
it is a fatal risk of getting electrocuted if you insert any metal piece into a plug socket. Hence do not put any metal in to plug socket
Yes
Its function is to supply electrical power via a plug that is plugged into it to supply an appliance.
If you leave a plug socket on without a plug in it you will lose between 550 to 1,000 health points per 1 swich
So that when you plug in something you don't get shocked.
Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]
Pull a plug out from the mains socket, open it up with a screwdriver, and have a look.
110 volts is the standard electrical voltage in the USA, so you will not damage your iron, when you plug it in. If the iron is dual voltage (110/230 volts), move the voltage selector switch to 110 volts before you use it in the USA. However, there are two diffferent types of electrical socket in North America (with or without earth grounding). For safety reasons, I would not recommend using your iron (anywhere in the world), unless the plug has a round earth pin, in addition to the two flat bladed pins.
if you mean the plug which you insert into an electrical socket, then you just pull it out. the same goes for the cable which is inserted into the camera
When electrical outlets get old they tend to chip and crack. Also in older outlets the socket gets loose and the plug will not stay in the outlet.