current flows from the negative to the positive cable and back into the battery cells, recombining with the element depleted of electrons that are flowing out the negative cable. The process is not 100% efficient and the battery will eventually cease producing current.
Connect the Positive + battery cable to the positive + battery post first. Then connect the Negative - cable to the negative - battery post.
I assume you're asking how can you tell which is positive and which is negative? The red cable is positive in the black cable is negative. But if they are not color-coded the positive battery post is slightly larger than the negative battery post. If you try to connect the negative cable to the positive post it would be a tight fit and if you connect the positive cable to the negative post it would be loose.
The red cable is the positive and the black cable is the negative. The positive post is slightly larger.
Red, positive + cable to Positive + battery terminal. Black, negative - cable to Negative - battery terminal.
Red cable to positive, black cable to negative.
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable
Red/positive cable to red/positive cable. Black/negative cable to black/negative cable. The battery is under the cover in front of the air cleaner.
Black is negative and Red is positive.
Audio battery???? If you mean Auto Battery then Red Positive (+) RED cable goes to Positive (+) post on battery. Black Negative (-) cable goes to Negative (-) post.
Nothing as long as you did not then connect the other cable.
You don't, you connect to the battery from the battery of another car. Use the positive cable to connect the two positive electrodes and the negative to connect the two negative electrodes.
Hook up the jumper cables in this order: (1,2,3,4) (1) One end of positive cable to positive post of GOOD battery (2) Opposite end of positive cable to positive post of DEAD/LOW battery of disabled vehicle (3) One end of negative cable to negative post of GOOD battery (4) Opposite end of negative cable to GROUND on disabled vehicle (a good ground is preferred over the negative post, however, the cable can also be hooked to the the battery post). To remove the jumper cables after starting, reverse the order (4,3,2,1)