0
I have an old JOHN DEERe 14t, I have used it behind a Farmall H. The H has about 30 hp, it was just barely enough. A tractor around 40 hp or higher is a better choice.
I have an old John Deere 14t, I have used it behind a Farmall H. The H has about 30 hp, it was just barely enough. A tractor around 40 hp or higher is a better choice.
Wiki User
∙ 10y ago
Wiki User
∙ 10y agoI have an old John Deere 14t, I have used it behind a Farmall H. The H has about 30 hp, it was just barely enough. A tractor around 40 hp or higher is a better choice.
Add your answer:
Earn +20 pts
If you need a tractor for a 200 acre wheat farm how many horse power should it be?
hp needed depends on the sixe of equipment you are going to pull with the tractor any tractor dealer or farmer could tell you what you need
How is a round hay bale made?
With a round hay baler. The baler is powered by the tractor through the PTO, an electrical control box, and hydraulics, which enables the operator full control over the baler. The tractor moves along the swath of hay, and the revolving pick-up cylinder picks up the swath and moves it into the baler chamber. In the baler chamber, the chains or belts move like a constant pulley system (there is more than one: bottom, top, and the two sides) rolling the hay, as it enters the chamber, into a cylinder. The cylindrical hay bale grows until it cannot expand anymore inside the baler. The size limit sensors in the baler go through to the control box in the tractor, often through audio alert, and the operator either keeps going until he can judge when the bale is big enough and/or until he sees it is nice and tightly packed enough inside the baler to let stop and let it out. But, before he lets it out, he has to stop first and, with the control box, apply the strings or netting to the bale. There is no need to worry about tying, as the baler machine does it automatically. Once the bale has been entwined (literally), the tractor and baler powers down, stopping the movement of the belts and pick-up wheel in/on the baler, then the operator lifts the back end of the baler (with the control box in the tractor of course, not manually), and initiates the belts or chains to eject the bale out of the baler. The back door closes, the baler power ups again, and resumes creating another bale. This process repeats until the operator has to quit because of one of four things: 1) the baler gets plugged up (most commonly in the pick-up shaft) 2) it starts to rain 3) it gets too late in the evening and the hay starts to, what we call, "toughen up." 4) he finished baling up the hay field
How much horse power on a four wheel drive tractor do you need to pull a 60ft air seeder?
To pull a 60ft air seeder you need a minimum requirement of a horsepower of 250 HP. If you have a tractor that has more than this that is good. This here is the minimal requirement so it's best if you have a four wheel drive tractor over 200 HP.
How do you make hay?
Well you have to have the equiptment. as long as have a hay cutter, a round or square baler, and a wagon for square bales,or a trailer and a hay lifter for round bails. and there you have it!!! oh and you need a tractor too.
How much horse power do you have with 14 psi on a 96 stock turbo?
You need more information to find out how much horse power there would be. There would be a variety of horse power concerning what engine the turbo was on.
How much fuel it need for a a big horse power?
Plenty.
How do you time a ford 532 baler?
A farm implement store can get you the information you need.
Why would I need to get a kubota Tractor?
Any tractor need can be fulfilled by a Kubota Tractor. Kubota Tractors have a large array of tractors they manufacture for any situation that would require a tractor.
How many horse power do you need to get water from 1oometer deep?
varies by the pump.
How much horse power does a 1994 Chevy 5.7L have?
Need to know the year.
What type of Farm Tractor Tires does a John Deere Tractor need?
Any tire made for Tractors will work fine with the John Deere Tractor. Just be aware of the size of your tractor so you can be aware of what size tires you will need to put on the tractor itself.
How much horse power does a 1970 charger have?
Depends on the engine... need to be more specific.
