Bulbs blown, or corroded sockets.
Check the brake light switch.
Taking your foot off the brake pedal...?
Check the brake light bulbs, Check the brake light fuse, Check the brake light switch, In that order.
Yes. I have found the schematic in the back of most "Haynes" manuals.
the brake light driver side not working
If it is the tail lights, it is the headlight switch. If it is the brake lights, it is probably the brake light switch. I really don't know how to replace the bulb in the 3rd light. change the brake light bulb first it may be shorted causeing the other problem
The brake lights in your 1983 Nissan pickup truck are controlled by the brake light relay switch. When the brake light relay switch malfunctions the brake lights will stop working.
My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?
blown fuse or turn switch bad
I would check the bulbs in the tail lights first. Your Brake switch is working ,because of the third brake light is coming on.Ususally all the brake lights are on the same fuse.... Thanks DomAnswerCenter window light is on a separate circuit. Manufacturers did that so you don't lose all the brake lights at once. Check connections at brake switch and fuses. If ok look for broken wire in harness...............good luck, Mike
probably the brake light switch on the pedal if none are working at all
There should be a fuse for the brake lights. If the fuse is good always check the ground wire.