Want this question answered?
Just wire it to a toggle switch. When you need it, just flip the switch.
you can just use a toggle switch,,,you need a relay capable of the amps it takes for the starter.it would connect between the starter and the battery,then you would need a toggle switch preferably a momatary toggle switch to activate the relay.
The cooling fan relay switch can be located on the back of the cooling fan motor. The relay switch should be labeled as such.
where is cooling fan relay switch located on 2000 s-type jaguar
The 1996 Mercury cooling fan relay switch is on the back of the cooling fan motor. The relay switch should be labeled as such.
The cooling fan relay switch can be found on the inside front quarter panel. The relay switch will be on the drivers side quarter panel.
The 2004 Dodge Intrepid cooling fan relay switch can be found on the back of the cooling fan motor. The cooling fan relay switch is attached to the fan motor with two retaining screws.
The 1991 Oldsmobile Cutlass cooling fan relay switch can be found attached to the right side of the radiator housing. The cooling fan relay switch should be labeled as such.
Take the 2 wires on the relay off and run each into the interior of the car where a suitable switch can be installed. Take the 2 leads and hook them onto the switch. Make sure you have an inline 30 amp fuse installed.
you use a relay switch.
The cooling fan relay switch, on your 2002 Monte Carlo, is located on the back of the fan hub. You will need to open the engine compartment hood in order to see the relay switch.
The 1988 Ford Taurus cooling fan relay switch can be found on the front drivers side quarter panel. The fan relay switch should be labeled as such.