It is called dieseling and it is caused by either your motor being hot or there is some fuel vapor left on the inside of your intke.
your headlamp switch on the dashboard has a small screw on it. its a 3 position switch. turn it to switch daytime running lights off.
If the engine stops running when the key is released, then the ignition switch is probably bad. The switch will need to be replaced.
The function of a stop switch is to cut the ignition so the engine can stop. If the switch is in the off position and the engine isn't running, then to start the bike you'll have to put it to the on position.
B
The engine fan switch is probably in the 'on' position.
Electric? 1) Check fuses 2) Ignition switch on or vehicle running? 3) Try holding switch down (with engine running) and slam door
This car does not have daytime running lights.
A 306 HDI may continue to run after you switch off the engine if the ignition timing is set improperly. This will force the engine to continue running for several seconds.
If you leave the Ingition Switch on without the engine running. The battery will go dead. Then you will have to get a boost or charge the battery to get the engine started.
Yes.
Faulty ignition switch.
A bad connection inside the ignition switch will keep it from turning the engine over.