Want this question answered?
If negative voltage is applied to the gate of a NMOS, it repels electrons from the channel region towards the bulk of the p-substrate and attaract holes from p-substrate towards the channel. The recombination between holes and electrons causes a deplation of majority carriers in the channel. Enough nagative gate voltage can cause the channel depleted of majority carriers and cuts off the current between the source and the drain. The least negative gate voltage causing this is called gate-source cut off voltage.
in regulated the voltage will be a constant one and can't be variant but is in case of unregulated
The thyristor functions in such a way that when the anode voltage is greater than the cathode voltage , it is not triggered but only triggers when a gate signal is applied at the gate of the device.
because it is being regulated.
since in an FET the value of the current depends upon the value of the voltage applied at the gate and drain...so it is known as voltage controlled device.. for example..in a mosfet..the current from drain to source depends upon the width of the depletion layer..which in turn depends upon the voltage applied on the gate.. so that is the reason
membrane voltage gated ion channels open and close with changes in the membrane potential
ACh binds to each ACH receptor which causes opening of ligand-regulated ion gate and the creation of end-plate potential.
I think Ca++Calcium ion
it is the voltage regulated
12 volts
working voltage is 5v regulated dc
iron
chemically regulated gates, voltage regulated gates
the anode-cathode voltage drops
If negative voltage is applied to the gate of a NMOS, it repels electrons from the channel region towards the bulk of the p-substrate and attaract holes from p-substrate towards the channel. The recombination between holes and electrons causes a deplation of majority carriers in the channel. Enough nagative gate voltage can cause the channel depleted of majority carriers and cuts off the current between the source and the drain. The least negative gate voltage causing this is called gate-source cut off voltage.
in regulated the voltage will be a constant one and can't be variant but is in case of unregulated
it should have an internally regulated alternator