its self adjusting
A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.
Is this a single belt or a serpentine belt system, if so look for belt tension idler pulley and loose belt, or single belt then you will need to loose and release tension on the power steering pump assembly.
By loosening the tension on the alternator nut
try tightening the tension pully works like a charm
Should have an automatic belt tensioner - if tension not correct replace tensioner
Should have an automatic belt tensioner -perhaps it is defective I don't think there is a belt tensioner. Belt tension is adjusted at the power steering pump bracket and idler pulley assembly.
i want a exploded view as a picture ,to show the reroute of the belt.
Loosen bolt in tension pulley, then loosen tension bolt. Replace belt. Tighten tension bolt. Last, tighten bolt through pulley.
180 to 200lbs
Remove belt and tensioner should just be bolted to engine
how do i find the auto tension release for the serpentine belt on a 2004solara
It may be the serpentine belt. Sometimes when you purchase an "on the cheap side" serpentine belt, it has a tendency of making noise even when the tension pulley has been change. Try purchasing a more expensive belt. The diamond back serpentine belt may be the best solution for this problem.