Try about 25 lb. ft. for the caliper bracket.
brake light on when driving oldsmobile alero
Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs. Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs.
Torque specs for brake caliper bolts 2005 mazda 6
no, no you can't.
For the Chevrolet S-10 model years from 1982 to 1993, the torque for the caliper mounting bolts is 37 ft. lbs. The torque setting for the brake hose-to-caliper bolt is 32 ft. lbs.
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
20-25lbs.
The relay panel on the 2000 Oldsmobile Alero is under the steering column and above the brake pedal. The relay pops out with a screwdriver.
The torque settings for the caliper pins on a Ford Escort is 21 ft-lbs. For the caliper anchor bolts, the setting is 98 ft-lbs.
70
I have changed two of them. Remove the caliper, brake disc and then the large nut at the wheel and then you will have to use a small sledge to pound the the thing that the nut is threaded onto back and then loosen the bolts to the hub
you either have a blown bulb or you have a broken wire