0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you calculate KWH by KW and Running Hours?
You multiply the power by time, ie kW*h
How many watts is 1.60 kw?
where, prices vary from region and power company get hold of a power bill The question should be: How much does 1.6 kWh cost. A kW is a measurement for power. The energy bill will increase if you sustain this power for a longer period (hence the h after kW, for hour).
Is there a difference between KW and kW?
AnswerKiloWatt hours. Its a measure of energy use. It is the amount of power used over time.Energy is the ability to do work, while power is the rate at which work is done.Your water heater may have a power rating of 5 kW. If it runs for 8 hours in a day, you would use 40 kWh of energy doing the work of heating the water.
What is the kw of 100kva transformer and how you calculate?
kw of 100kva=100*0.8 pf=80kw( if the power factor is 0.8)
How much will a 260 watt heater cost to run for 4 hours if power costs 20 cents a kw?
0.260kW * 4h * $0.20/kWh = $0.208
Convert 20 kva to kw?
Your question cannot be answered, unless the power factor of the load is specified. Since true power(measured in watts) is the product of apparent power(measured in volt amperes) and the power factor of the load.So, given your figure of an apparent power of 20 kV.A(not 'kva'*), the corresponding value of true power could (theoretically!) range from20 kW at a power factor of 1.0, to0 kW at a power factor of 0.(*The correct symbol for kilovolt ampere is 'kV.A', not 'kva', and the correct symbol for kilowatt is 'kW', not 'kw'.)
How much energy do you need to build a small town of about 500 people?
If the town has natural gas for heating, then the power needed per household is between 5 kW and 10 kW. If only electric heat is available, then the combination of electric resistance (auxiliary - from 7 to 10 kW for small residential units) heating, combined with electric clothes dryer (from 2 to 5 kW), electric water heater (from 2.5 to 7.5 kW), and stove (5 kW to 7.5 kW) totaling a min of 15 kW to a max of 20 kW. That would put the max power requirements between 5,000 kW and 10,000 kW. As a matter of reality, a diversity factor of .6 to .7 would reduce the max power to 3,500 kW and 7,000 kW.
What is maximum motor kw that can be started on direct on line starter?
20 kw
How convert Hp to kW?
The question cannot be answered. It would depend on what device you are using to do the converting. [edit] Well, in the simplest terms: Power (kW) = Power (HP) x 0.7457 Power (HP) = Power (kW) x 1.341
Why you take energy bill in units of energy instead unit of power?
Energy bill must be in terms of Energy unit (KWH) only. Energy is KW (power) utilized over a period of time. The unit of energy is Kilowatthour (KWH) Unit of power is Kilowatt (KW) KW is instantaneous power being utilized. KW (power) over a time period is Energy (KW H)
6000VA Inverter is how many kw?
KVA=KW*Power factor, considering PF 0.9, 6KVA=KW*0.9 KW=6/.9=6.67
How do you calculate condenser capacity?
condenser capacity(kw) = compressor cooling capacity (kw) + compressor input (kw) power condenser capacity(kw) = Pf + Pa
How do convert KVA to KW?
kVA = kW divided by (power factor). The power factor is the cosine of the angle between voltage and current.
How motor kw is been decided?
You can measure the output power of the motor (mechanical power or shaft power) by a speed and torque sensor. The product of speed (angular velocity to be precise) and torque is power. Is this case the output power. The SI unit of power is W, kW is 1000 W. So the power/1000=power [kW].
What is the power of a factor?
power factor means kw/kva
What is the power of a circuit?
power factor means kw/kva
How do you calculate 10 mw windmill power to kw?
1 MW is 1000 kW therefore 10 MW is equal to 10,000 kW.
