What is Ethernet port in computer system?
The Ethernet port connects with a cable to a network.
An ethernet port is used for connecting your computer to a network.
An Ethernet port is for you to plug in an Ethernet cable. You have your Ethernet cable plug into your Ethernet port and your Modem or Router to give you access to the internet.
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
I don't think your computer has a PS2 port or that you PS2 has ports that do not have proper names Like USB Port or Ethernet Port
Look at the back panel of the computer. If it has a phone line-looking port except wider that has "ETHERNET" written on it, it has it.
Technically, wireless networking standards are part of the Ethernet family of standards, so what you're really asking about is changing from wireless Ethernet to wired Ethernet. If your computer has a working RJ45 port, all you need is an Ethernet connector cable to connect to a suitable hub or router. If your computer doesn't have that port, you need to install a wired network adapter.
this is answer in view of IT and Ethernet port. Answer: An Ethernet port is an opening on computer network equipment that Ethernet cables plug into. These ports are alternatively called jacks or sockets. Ethernet ports accept cables with RJ-45 connectors.
First, make sure it is actually an Ethernet cord, since Phone Lines and Ethernet cords are commonly confused with each other. But if you know its an Ethernet cord, look for a fairly large port that looks rectangular, Google a picture of an Ethernet port and look for it on the back of your computer. Once you find this port on the back of your computer, plug one side of the cord into it, then… Read More
Should one believe ATT DSL installation software manual when it says that a Ethernet adapter needs to be installed in a computer from 2002.?
In order to connect to the DSL modem we need to have an operational Ethernet port on the computer. That is what the user guide is referring to. Earlier data connections (dial up) on phone line modems did not require an Ethernet port. All DSL modems now transfer data to computer through an Ethernet port (wired or wireless).
You connect an old laptop to broadband just like a new laptop, using the Ethernet port. If the computer doesn't have an Ethernet port, then you will have to purchase an adapter.
Use the Ethernet Port (The MacBook Air dose not have a Ethernet Port)
The "Ethernet Port" Obviously is used for the Ethernet cable which often connects computers to a router. A router is a device that gets the Internet or from the phone/Internet port and routes it to your computer routers are required for ADSL and ADSL2+ to work. Oftener more than one computer is connected to the router. But this setup may be different for "Cable Internet because i have never had cable.
PLug an ethernet cord into your router port and the other end into your computer
A USB port is the most common port on a computer.
An Ethernet port appears to be almost identical to a telephone jack, although it is slightly larger. There is often a symbol beside the port with two boxes on the bottom and a box on top, with a line connecting all three.
Through either its wireless connection or through a ethernet port.
Step 1. Unplug ethernet wire from desktop computer. Step 2. Plug the ethernet wire you just removed into your laptop's ethernet port. Step 3. When finished browsing the internet or when portability is desired, disconnect the ethernet cable from laptop and return to the port on the desktop.
How can you use a dial up connection on a new computer that only has ethernet port and no telephone port?
Use Dial-UP Modem for Network Connection
The answer to your question is NO. The HP 4200 does not come with a USB port, only parallel and optional ethernet ports. You can get a parallel to USB cable if you do not have a parallel port on your computer.
An ethernet wire
Your best bet would be to install a network card. If that works, just disable the onboard network port in device manager.
Suppose you have a computer with its Ethernet port used for a service other that internet. There is no way to combine services to the same router. how can this computer gain access to internet?
The easiest way to solve this problem: use a wireless connection. Many recent computers include a wireless NIC (network interface card), and can connect to wireless networks easily, leaving the Ethernet port free. This will only work, obviously, if this computer has a wireless card and there is a wireless network to connect to. If wireless is not an option, purchasing an additional Ethernet card will upgrade the computer to owning two Ethernet ports. One… Read More
No, it will not take up an empty ethernet port.
Serial port is by far the fastest port. It is so fast that it is used in modern computer to connect hard drive to motherboard. Current generation of serial port is SATA 6Gpbs.
The ethernet port is technically called LAN, short for Local Area Network. The ethernet cable is called a Category 6 cable.
no they dont
You need to get a 20 port Ethernet Switch. (or "link" two 10-port or "link" four 5-port). Then connect each computer to the switch. They can all talk to each other.
An Ethernet port. :]
IEEE 1394 port
You can connect computers through various type of ports (e.g. through Ethernet (wired or wireless) , USB or Serial port. What port you pick, will depend on your application needs and at what speed you want the connection to work. If two computers have 10/100Base-T Ethernet port these can be directly connected using a crossed Ethernet cable without need of a switch or hub. - Neeraj Sharma
A ethernet port is a common port on most computer / laptops and quite a few other new updated devices such as tv. This device in general households can be used to connect to the internet from a modem but more often then not wireless technology is implemented. The port in a office example is used to not only connect to the internet but also connect to the local area network which is made up… Read More
Well, you may know that USB ports can be used for similar and same purposes as Ethernet. Really, the only hardware need is a converter. Another Answer The Ethernet ports on a computer system are supported by standard TCP/IP protocol layers, while the USB ports are supported by a serial standard. These are totally different hardware channels. I've never seen such an interface offered, but that certainly doesn't mean it doesn't exist.
You hook the console up to the computers ethernet port. They will both be able to be used at the same time.
Moderm modems (Dial-up, Cable, ADSL) are connected directly to the Ethernet port of the computer.
rj-11, as opposed to rj-45 for ethernet
ethernet cable from the wireless router should be connected at the back of the tower the port is normally yellow
Where can you get a 2 port ethernet switch In other words if I have one ethernet cable from the router and I want to splice it into 2 cables where should I get one?
Either online suppliers or at any good computer store
In the Ethernet port at the back of the PS3
anything that connect system and internet is called port
It's an Ethernet port used for network connections.
fast ethernet port
in order to connect to the internet you will plug the modem your internet provider provided you into the Ethernet port of the computer which will then allow you to access the internet
Either a router connection and a modem, or a USB Stick Modem.
The Ethernet cable should generally not be plugged into your computer, but rather directly into an Ethernet router.
No Ethernet is a low level standardized protocol for sending data. It is the protocol your computer sometimes uses to send data over a wire to another computer(usually a router or switch). Higher level protocols use lower level protocols to send their data. IP for example can use Ethernet to get from computer to computer or router to router. TCP can use IP to get from a starting computer to an ending computer through many… Read More
There are two ways, as far as I know... a) You can use an Air Port card to connect to a wi-fi network. or b) There's an ethernet port on the side of the computer, you can plug in with that.
It depends on what you mean by "Port"... A port could refer to the physical connection such as an Ethernet port. But most likely you are referring to a port #. In networking, it refers to a particular identifier in the data packet that helps network protocols route that data to the appropriate application. (This occurs at the Transport Layer of the OSI model). For example, when a piece of data arrives at your computer… Read More