0
it is a 34 pin connector
What else can I help you with?
What is a FDD connector?
fdd is a floppy disk controller. this is you will hoke it up
Which sort of power connector does floppy disk drive typically used?
4-Pin Berg connector
What is floppy disk slot?
a floppy disk slot is what you put the floppy disk in on a CPU
Explain how the two available drives on FDD data cable are distinguished?
Floppy data cable is 34 pin flat cable having two connectors for floppy drive. The floppy drive connected at the end connector is A: and the another connector disk is B:..
does a floppy disk hold information?
A floppy disk DRIVE can read, erase and save information on a floppy disk. The disk can't do it by himself.
Does a floppy disk rotate faster than a hard disk?
no the floppy disk rotate slower its because hard disk rotate faster then floppy disk
What is floppy disk management?
It's higher than Floppy Disk Associate, but not quite Floppy Disk Board of Directors.
What you inside a floppy disk into a so that data stored in the floppy disk can be read?
To read a floppy disk, you insert a floppy disk into a floppy disk drive. Not all computers have floppy disk drives. Typically desktop computers or ones that stand on the floor have floppy disk drives. New machines today allow a USB thumb drive (USB flash memory storage device) to be used in place of a floppy drive. All modern computersy have USB connections. If you need to read a floppy disk and you computer does not have a floppy disk drive, you can purchase a USB connected floppy disk drive for your computer.
What is floppy disk in German?
The term "Floppy disk" is also used in German as is "Diskette" or "Floppy"
How can you change a floppy disk serial number?
(giggle) FLOPPY disk? Heehee!
What holds the floppy disk also called the AA drive?
Correction: the "A" Drive is a floppy disk dirve that holds, reads and writes on the floppy disk.
What kind of power connector provides the fdd with power supply?
The power connector that provides power to a floppy disk drive (FDD) is typically a 4-pin Molex connector. This connector supplies both 5V and 12V power to the drive, with the 5V line powering the electronics of the FDD and the 12V line used for the motor that spins the floppy disk. In some modern systems, especially those using SATA, a SATA power connector may also be used with appropriate adapters.
