Take your circuit voltage and the power of the appliances and divide.E is voltage I is amperage and P is power or wattage. P=ExI Example. 3500 watt heater draws ? Amps on 220Volts I=P/E I= 3500w/220v I= 15.9Amps
Ohm's Law
Voltage = Current x Resistance
V = I x R
AnswerThere is NO 'Ohm's Law formula'! Ohm's Law is simply a statement of the relationship between voltage and current in somematerials. What is mistakenly called the 'Ohm's Law formula' is actually derived from the definition of an ohm.
INCREASES
"Volts" is electrical pressure applied to a circuit; whereas, "ohms" is electrical resistance to that pressure. One cannot determine ohms from voltage without knowing either the current (in "amps") or power (in "watts"). A normal 120V household circuit can handle a maximum of 20 amps, so using ohm's law of resistance = voltage / current, the minimum resistance required in a 120V household circuit would be 6 ohms. Any less than 6 ohms will cause the circuit breaker to trip.
30 ohms
28 + 56 = 84 ohms
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
ohms=amps/volts Amps= volts/ohms Volts = Amps*Ohms
use ohms law which in this case is volts divided by resistance in circuit
Resistance of the circuit = (voltage across the circuit) divided by (current through the circuit)
The formula you are looking for is Ohms = Volts/Amps. R = E/I.
I=e/r
Here is the formula you use. I = E/R. I = amperage, E = volts, R = resistance in ohms.
INCREASES
Assuming DC and resistive loads, resistance equals voltage across the load, divided by the current through it. In this case 120/10 or 12 ohms.
500 ohms.
35 ohms
5 ohms.
..using the formula Voltage(V)=Current(I) * Resistance(R) .. we can get the result ...current will be 5 Ampere