It is a North American electrical term. It is a combination the words amp and capacity rolled into one word "ampacity". When talking about how much amperage a wire can legally draw, it is referred to as the wire's "ampacity".
The meaning of the word ampacity is a conjunction of two words. When you want to know what the capacity of amperage that a wire will legally carry you ask what is the amp capacity of the wire or shortened down to what is the ampacity of the wire.
Answer
'Ampacity' is a North American term for the 'current-carrying capacity' of a cable. It is not used in most other English-speaking countries.
'Ampacity' is a term used in North America (rarely, elsewhere), to mean the 'current-carrying capacity', of a conductor, in amperes.
Ampacity is the current which a wire at a given size can carry.
Conductors must have an ampacity not less than the maximum load that they are supplying.
A #8 copper wire with an insulation factor of 75 or 90 degrees C has an ampacity of 45 amps. A #8 wire with an insulation factor of 60 degrees C has an ampacity of 40 amps.
ampacity is 1.3 Amps
The ampacity of 500 MCM R 90 degree wire is 395 amps. Don't forget to de-rate the wire as there are more that three conductors in a raceway.
No they can not, because the electrical code states that wires in parallel can only be 1/0 AWG and larger. The ampacity of 1/0 wire is 150 amps. The ampacity of a wire for 60 amps is #6 which is much smaller that 1/0 wire.
Conductors must have an ampacity not less than the maximum load that they are supplying.
Conductors must have an ampacity not less than the maximum load that they are supplying.
A #8 copper wire with an insulation factor of 75 or 90 degrees C has an ampacity of 45 amps. A #8 wire with an insulation factor of 60 degrees C has an ampacity of 40 amps.
ampacity is 1.3 Amps
The ampacity of 500 MCM R 90 degree wire is 395 amps. Don't forget to de-rate the wire as there are more that three conductors in a raceway.
No they can not, because the electrical code states that wires in parallel can only be 1/0 AWG and larger. The ampacity of 1/0 wire is 150 amps. The ampacity of a wire for 60 amps is #6 which is much smaller that 1/0 wire.
Isn't it 35, according to the NEC 310.15(B)(16) Table.
In the electrical trade aluminum wire is equivalent to copper wire as it is also used to carry current. To carry the same current as copper wire aluminum wire is up sized to meet the same ampacity.
Yes the ampacity of #12 is 20 amps whereas the ampacity of #14 is 15 amps, so you are well within the range using #12 wire.
Yes, a #12 AWG conductor has a greater diameter than a #14 AWG conductor. A #12 conductor has an ampacity of 20 amps whereas a #14 conductor only has an ampacity of 15 amps.
you must run the proper size wire based on the ampacity needed, wire must have four conductors including the gound
Wire guage is used as a measurement for the ampacity of the wire. # 14 wire is allowed 15 amp to be applied to it. Voltage is governed by the insulation factor of the wire. The three standard insulations are for 300V, 600V and 1000 volts.