with a barrel lock key
You mean to get a new key cut ? You need to take a key barrel out and it is on the key barrels, I find the trunk lid key barrel is the easiest to take out.
to remove stilo ignition barrel, look underneath the barrel. there is a square button holding the barrel in. put the key in the ignition, turn 2 notches, and press the button in with a screwdriver. Then wiggle the barrel out using the key.
Worn key or barrel, do you have a new key you can try it with ? If it still doesn't turn properly you got a worn ignition barrel that has to be replaced
there is no barrel. meganes in 2004 are key cards only
how to remove key barrel from a XR8 steering column
On the Barrel of the ignotion (where you stick your key) the barrel WILL have to be removed from its housing to read the code printed on there.
From SAAB., Your nearest dealer can get a key to match your barrel.
To remove the ignition barrel you need to be able to turn the key to position II. On the barrel casing you are looking for a small hole in to which you insert something like an Allen Key. The barrel can then be extracted. If you can't turn to the second position then its time to get the drill out and carefully drill the contents of the barrel. It's worth tapping the casing with a hammer whilst turning the key if the barrel has stuck before drilling.
the key needs to be in the barrel and turned until the two small square pegs on the underside of the barrel casing can be pushed into the barrel .allowing the barrel to be pulled out i just did this on my farthers car and i believe there should be two screws securing the barrel aswell but they were missing hope this is of help to you
no need to remove the broken key, you will find that you short bit when inserted into barrel will turn the barrel, at least until you get a newy
there is a hidden button along the barrel which can only be pressed with the key in the accessory position. find the button, press it in, ussually a small Allen key works fine and pull the key outward. the barrel should come straight out. WHATEVER you do do not move the key position, if u move from accessory to lock then the whole column is finished