answersLogoWhite

0


Best Answer

I like primer epoxy because it dries hard. But that's just me. It really depends on what your doing with it.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is a better primer epoxy or Urethane base?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you Paint over Latex Primer with Epoxy Primer?

Epoxy primer has to go over a bare surface otherwise it can act as a stripper, causing the base coat, along with the newly applied epoxy to delaminate or lift from the surface.


Can you paint water base primer over oil base polyuretane?

Not a good idea, better to use oil based primer.


Can you use oil base primer on drywall then paint with latex paint?

It's generally much better to use water base primer on drywall.


Why is there a bumpy finish after you prime nude carbon fiber with epoxy primer?

carbon fiber is assembled of the layers of fiber and laminated (buttered) with EPOXY resin epoxy primer reacts with the resin as they are the same chemical base. the epoxy in the CF is re-activated (kinda) and swells on the immediate surface where the trapped chemicals from the incompleted outgassing during lamination has been laying in wait for somthing to "soften" the coffin they have been trapped in. think how epoxy is typically applied to 2 surfaces..allowed to tack/dry.. then the 2 surfaces are mated together (laminate counter tops, carpet on speaker boxes etc). your solvent rich, epoxy primer breathed life back into the old surface.


Is oil base or latex better for cinder block?

If your cinder block is outside, primer it first, then use oil base.


Can you use polyurethane oil base paint on cement walkway?

Yes, you can,and it's very good for that use. However if the concrete is bare, you must apply an epoxy primer before the polyurethane finish.


Can you use latex primer over oil base enamel?

Not directly. You will need to use a primer made to adhere to oil and will accept a latex topcoat.


How do you prime plywood?

It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer


Can you use rubber base over epoxy base paint?

When you say rubber base paint I assume you mean latex paint. Yes, latex paint will adhere to an existing epoxy finish. However, the epoxy must already have cured. Meaning, it was already applied sometime in the past. A pretty good rule of thumb to go by when you're unsure if two finishes are compatible is to apply a coat of primer. Also, when latex paint is applied to a primed surface it will last that much longer, appear more uniform and will usually require only one coat of paint for proper coverage.


Can you use epoxy paint over water base paint?

I wouldn't if it was my driveway. I'd power wash it off first then the driveway coatings would stick better.


Can you use latex primer oil base for a concrete?

You have a contradiction ! - Latex primer CAN NOT BE oil based.


Does the eyeshadow base go before the eyeshadow primer?

Shadow base would go on first. If you are using a shadow base, you should not need an eyeshadow primer. They are basically the same product. The only exception I can think of is if you are using the MAC spray primer. If that is the case, you would put on your shadow base, spray the primer on your shadow brush, put the shadow on your brush & apply.