It's a fairly straight forward procedure. The PCV valve mounts in the valley pan. Run the hose from the PCV valve to the large vacuum port at the bottom of the carb. That's it.
Not exactly sure but I have a 1979 LeMans with the 231 V6 and I believe the PCV to be a vertical silver-colored valve located at the back of the intake manifold below and behind the carburetor.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE
the brake vacuum booster connects to the intake manifold all by itself and the PCV valve hose should hook directly to your carburetor.
The pcv valve is on the passenger side valve cover
The PCV valve is located in the valve cover
Under hood, center, upper engine area, front of carburetor, mounted in intake manifold
The PCV valve on q 2007 Torrent is made into the valve cover. It is not removable, the valve cover and PCV valve must be replaced together.
PCV valve (A)