0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are the wellhead components?
1- Casing Head 2- Casing spool 3- Tubing Head
What is the casing spun of silk by caterpillar?
A cocoon.
What is the purpose of using a plastic casing?
The purpose of using a plastic casing depends on what product the casing is for. Generally plastic is used because it is a very versatile material that can both protect and look good. Plastic is also easy to color and a relatively cheap material.
Why do we use aluminium casing?
Aluminium has a low density and is not corroded.
What are the advantages of aluminium casing?
Aluminium has a low density and is not corroded.
Where are some of the places that one can purchase a quality snatch block?
A quality snatch block can be purchased online at websites, such as Alibaba, Amazon and Weiku. A snatch block is a pulley inside a metal casing and it is used with winching duties.
Where is the fuse block located in a 2000 Infiniti Q45?
open the hood its located right next to the battery its a black casing
Something about Casing drilling and what are the disadvantages of casing drilling?
give me the total casing progamme in drilling
Where are astra diesel mk3 timing marks?
on the crank pulley mark to the cut out on the sump/ block casing, the diesel pump pulley mark to the raised plastic lug on the rear cam belt casing, the cam is timed up through the vacume pump housing by a dowl hole
What is a casing drift?
casing drift is an inside diameter for the casing which allow any drift size pass through this casing with 1/8" under gouge
How do you drain oil in 1986 goldwing aspencade?
Bike on center stand, and oil catch pan under the engine, while the engine is warn, the pan bolt is at the back of the engine, brake pedal side, drain and put the nut back in. Make sure the gasket is good. The oil filter is in the casing at the front of the engine just below the rad. Un bolt the casing, be careful, there is a washer and a spring in there. Watch the way things come out and replace the same way. With the filter you get 2 rubber o-rings. They go on the long bolt in the center of the filter casing. When you re-install, there is a boss on the block casing that fits to the oil casing where there are 2 ridges. As you start to screw in the casing with the new filter, the boss ( bump ) has to be lined up to the engine block, therefor you will not be able to turn the casing, this is a good sign. Re-fill with 3.2 liters 10w40, run up engine and check the level and check for leaks. ( spring goes in first, then washer, then the filter.
What is another word for brain casing?
Casing of the brain
What is the purpose of a waistband casing?
Elastic is inserted in the waistband casing.
What are the parts of the bullet?
there is the primer, the rim, the casing and the projectile there is the primer, the rim, the casing and the projectile there is the primer, the rim, the casing and the projectile
What are the parts of a bullet?
there is the primer, the rim, the casing and the projectile there is the primer, the rim, the casing and the projectile there is the primer, the rim, the casing and the projectile
How do you you replace a oil filter on 1981 HONDA GL1100 motorcycle?
If I remember correctly, the filter is the same as the 1200's. Look at the front of the engine, you will see a ribbed casing with a bolt in the center. Also, on the casing there is a boss ( small bump ) which lines up to groves on the engine block. When you remove the casing, oil will come out so use a catch pan, the long bolt stays in the casing. Now you will see the filter. Pull the filter out, then there is a washer, then a spring. Put them back in that order. clean the casing, and with the new filter, there are new o-rings. Pull out the bolt, replace the o-ring, replace the o-ring on the casing, replace the spring, washer, and then filter. Line up the boss with the groves and torque the casing back. Fill the engine with the new oil, and check for leaks. Use 10w40 Honda grade oil.
What is the purpose of casing?
The purpose of casing is to allow a space for elastic or drawstring.
