it clutches your dirt bike and then if you rub it a genie comes out
how do i fit a clutch on my grizzly 12 dirt bike
ya
yeah.
yes
It all depends on what kind of dirt bike you have. If the clutch isn't a centrifugal clutch, (which means the clutch engages a certain acceleration speed) then usually the bike will force you to be in neutral, and hold in the clutch when starting it. If it is a centrifugal clutch, then usually you only have to be in neutral, since the driver isn't in control of the clutch. hope this helps.
To help run the thing right.
actually i ride bikes and the clutch to change gears is on the left , very few have it on the right
when a clutch goes bad the bike will not be able to go top speed or let the rpms get to high in any gear because the clutch is engaging when it is not the right time hope that helps
Can u teach me how to change a clutch kit for a 96 kawasaki Volkin??
== At a low RPM it is recommended to use the clutch but at 3rd gear it is alright to shift UP to 4th without pulling the clutch.
blown up buddy blown up buddy Might be :But if this dirt bike has a clutch try putting it in second gear and pushing it with the clutch in then when you get it moving fast as you can let the clutch out .If the motor turns over your kick start is probably jammed might have something gamed in it .
not always. now if you are in first gear and you are giving it gas and you pop the clutch real hard it could possibly break it.