fuel level sending unit is the unit that sends message from fuel tank to fuel gauge, telling you how much fuel is in tank
The fuel pump has a check valve that holds the fuel pressure. The sending unit monitors the fuel level in the fuel tank.
Do you mean the Temp sending unit, oil pressure sending unit, or fuel level sending unit?
Relieve the fuel pressureRemove the rear seatRemove the fuel pump/fuel level sending unit access cover.Disconnect the electrical connector from the fuel pump/fuel level sending unit assembly and set the cover and wiring harness asideHold the sides of the fuel line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel linesRemove the fuel pump/fuel level sending unit six mounting screwsCarefully meneuver the fuel pump/fuel level sending unit assembly out fuel tankThe fuel level float and sending unit are delicate.Using a screwdriver,release the locking tabs on the chamber flange and remove it from the fuel pump/fuel level sending unit chamberCarefully pull the fuel tank temperature sending unit wiring harness part way out of the fuel pump/fuel level sending unit.Do not try to disconnect itUsing a screwdriver,release the snap fit portion and pull on the fuel level sending unit and remove itDisconnect the fuel pump electrical connector hold the sides of the fuel pump line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel pump fuel lines from the fuel level sending unit assemblyCarefully pull the fuel level sending unit assembly part way straight up out of the chamberUsing a screwdriver,release the two locking tabs and remove the fuel filter from the chamber.Remove the fuel pump bracket and pull out the filterPull down and remove the fuel pump from the fuel filter housing
Relieve the fuel pressureRemove the rear seatRemove the fuel pump/fuel level sending unit access cover.Disconnect the electrical connector from the fuel pump/fuel level sending unit assembly and set the cover and wiring harness asideHold the sides of the fuel line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel linesRemove the fuel pump/fuel level sending unit six mounting screwsCarefully meneuver the fuel pump/fuel level sending unit assembly out fuel tankThe fuel level float and sending unit are delicate.Using a screwdriver,release the locking tabs on the chamber flange and remove it from the fuel pump/fuel level sending unit chamberCarefully pull the fuel tank temperature sending unit wiring harness part way out of the fuel pump/fuel level sending unit.Do not try to disconnect itUsing a screwdriver,release the snap fit portion and pull on the fuel level sending unit and remove itDisconnect the fuel pump electrical connector hold the sides of the fuel pump line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel pump fuel lines from the fuel level sending unit assemblyCarefully pull the fuel level sending unit assembly part way straight up out of the chamberUsing a screwdriver,release the two locking tabs and remove the fuel filter from the chamber.Remove the fuel pump bracket and pull out the filterPull down and remove the fuel pump from the fuel filter housing
I believe that is the sending unit for your gas guage
It is on the fuel sending unit that is inside of the fuel tank.
The sending unit is in the fuel tank. It's the thingy with the float that foes up nd down with the fuel level and sends this information to the gauge.
It is on the fuel tank sending unit. You can either raise the bed or drop the fuel tank to get to it. The sending unit fits in the top of the fuel tank.
The fuel level sensor is on the fuel pump module in the fuel tank.
The fuel tank has to be removed to gain access to the fuel sending unit. The fuel sending unit and the fuel pump is replaced as a unit.
In the gas tank.
you will need to take the fuel tank out because it is inside of the tank.just put a new fuel sending unit in and you should be good to go.