0
It is a valve in the brake lines going to the rear of the vehicle. It adjust the amount of fluid flow to the rear brakes depending on the height of the rear suspension. The lower the suspension, the more weight in the vehicle, the more rear braking power is needed.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Can the height sensing proportioning valve be bypassed mine went bad?
no,this valve intergrates with the sensors in the brake system. replace the HSP valve
1999 dodge ram 2500 V10 4x4 your brakes leaking fom the rear it goes from the axle to frame by the shock looks like a distribution valve what is it?
Height sensing proportioning valve.
What is a brake load sensing proportioning valve?
Lspv-load sensing proportioning valve is the part of break assembly .it senses the load of vehicle and aply an effective pressure with respective to the vehicle loaded or unloaded & break the vehicle.also avoid skiding of vehicle.
There is some type of valve that the rear brake line goes to near the left rear wheel mine is leaking what is it called?
Not knowing what kind of vehicle you have, all I can do is guess that it is a load/height sensing proportioning valve.
Can you bypass the load level valve on 1996 Toyota Tacoma?
The proportioning valve is used to determine the amount of brake power to be distributed to the rear wheels by sensing the height of the bed (differences in rear weight) if replacing valve you should properly bleed air out of system. The valve is there for a reason it should not be bypassed.
What is the block on the frame of an 1988 dodge Dakota where the brake lines run in to and a lever and a spring system running down to the front of the rear drivers leaf spring?
It is a height sensing proportioning valve. It controls rear brake pressure depending on load.
Where is the proportioning valve located on a 1984 corvette?
AnswerThe proportioning valve and warning switch is integrated into the master cylinder assembly.I think the proportioning valve is located on the frame rail under the master cylinder?Thats where it is on my 1980.The proportioning valve is not on the frame rail on an 84. It is inside the master cylinder.
A proportioning valve is part of an automotive electrical system.?
No, the proportioning valve is used in the brake system to apply different forces of pressure to the front and rear brakes.
Is a proportioning valve is part of an automotive electrical system?
No, the proportioning valve is used in the brake system to apply different forces of pressure to the front and rear brakes.
Do you have to replace the proportioning valve when replacing the master cylinder?
No, not unless there is a problem with the valve which is rare.
Does the Kia sephia have proportioning valves?
Yes the kia sephia has 2 brake proportioning valve located on the fire wall
Is a proportioning valve and a brake force regulator the same thing?
The proportioning valve adjusts the amount of fluid pressure between the front brakes and rear brakes, I would say the answer is yes.
