0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you convert a deep well jet pump to a shallow well jet pump by plugging the top three quarter inch opening and drawing water in through the bottom one and a quarter inch opening?
You can convert a deep well jet pump to a shallow well jet pump by plugging the top three quarter inch opening, and drawing water in through the bottom one and a quarter inch opening.
How does a jet pump work in a water well?
The most basic jet pump has a round pump chamber containing an impeller. The outlet to the well is large and the outlet to pressure tank is small. When the pump is primed and switched on it will suck water in and expel it at a higher rate. They are very susceptible to air leaks -every connection MUST be airtight.
How does a jet pump work in a water?
There are two types of jet pumps. Deep well jet and shallow well jet. The deep well has it's jet (ejector) in the well. The jets come in two different configurations. Two pipe and single pipe. The two pipe uses two pipes lowered into the well to the existing water level with the jet on the end. The single pipe jet is hung in the well with only one pipe. The jet has two leathers to seal it to the casing making the casing the second pipe. The shallow well jet pump has it's jet on or in the pump. These pumps can only lift water 25 feet. Once primed, the jet pump will force water down the pressure pipe into the jet, where it will be sent through a nozzle (of differing sizes depending on pump and water level) and into a Venturi tube (also differing in sizes) which creates a vacuum that will send more water up to be captured in the storage tank.
Can you use a deep well jet pump as a shallow well pump by plugging the top hole off and just using the bottom hole in the pump?
yes
Can you replace a two pipe jet pump with a single pipe jet pump?
Yes you can if the water level from the inlet of the pump is less than 25 feet. That's the limit of a shallow well jet pump. It can lift water physically 25 feet vertically, no more. If the well casing diameter is three inch or larger you could also install a submersible pump.[url="http://www.pumpsandtanks.com/Pumps/jet_pumps.htm"]Jet Pumps[/url]
Can you use a deep jet well pump as a shallow well pump by plugging off the top hole and only using the bottom?
yes
What size input pipe is used for a shallow well jet pump?
5inches
How do you install a shallow well jet pump?
A shallow well jet pump sits on the ground next to the well. To install it, connect tubing to the intake side of the pump and put a foot valve on the end of the tubing to control the water. Lower the foot valve and tubing into the well. Remove the drain plug on the pump and pour water in it to prime it. Replace the drain plug, connect the pump to power and turn it on.
Where is the pressure switch in a well water supply?
The pressure switch is usually on the pump if it's a jet pump, or at the base of the pressure tank if a submersible pump.
Is 250 considered a deep well or shallow well?
Anything over 80 feet is considered a deep well. A jet pump can pump up from 80 feet, more than that needs a submersible pump.
Who produced jet pumps for Montgomery ward?
I have a deep well MW jet pump installed in 1978. The pump has only MW designation, but the motor has the Goulds name on it, so I suspect they were produced by Goulds.
Can you use a deep well jet pump as a shallow well jet pump?
Yes. You can use a deep well pump as a shallow well pump. You simply can not go the other way. A shallow well pump produces a vacuum and draws the water to the top by the vacuum. It is restricted to 20 feet maximum depth. Deep well pumps use a different mechanism. They either lift the liquid or pump it with a pump at the bottom of the well. They do not have the 20 foot limit.
