yes
A shallow foundation is generally considered any foundation element that is 6 feet or less in depth. or the depth of foundation is equals to its width of the foundation. Examples are thickened edge slabs and grade beams that are supporting minimal weight.
Anything over 80 feet is considered a deep well. A jet pump can pump up from 80 feet, more than that needs a submersible pump.
Answer varies. Is it a deep or shallow box? is there a receptical, a switch in the box as well? is it just a junction box? are they single wires or NM cable?
Depending on your pump, you may not be able to convert it. There are three basic kinds of jet pumps for wells. Shallow, Deep and Convertible. In the typical configuration the shallow well pump is the easiest to identify. It should have a single opening (1 1/4" diameter) on the front face. All the pumps will have the discharge on the top of the pump (1 1/4" diameter). The dimensions in parentheses are from my old Montgomery wards 1.5 hp pump to give a reference. The Deep well and convertible pumps will have two openings on the face. Depending on the manufacturer and model they can be big on top or big on bottom. In the deep well installation, the eductor and venturi are usually located within 10' of the water surface during well drawdown. In the convertible installation the eductor and venturi are typically bolted directly to the face of the pump, covering the two holes and providing just the one suction line. Hopefully you have a deep well or convertible type with the eductor and venturi bolted to it. All you have to do is extend the two lines on the front of the pump to the eductor/venturi (within 10-feet of the water surface) and then continue one suction line don into the water and place a foot valve on the end. try going to the pump manufacturer's website and reviewing the installation manual, it should have some good pictures that will point you in the right direction.
A "shallow" copy is when the member values are physically copied from one object to another, *including* the values of any pointer or reference members. If there are pointer or reference memebrs, then, those poointers or references refer to the *same* objects as the original object, which is usually a bad thing. That's why you want to define a copy constructor and assignment operator for objects that contain pointers or references. It's called a "shallow" copy because only the values of the pointers/references are copied, instead of making copies of those referred-to objects and setting pointers to them. *That* is what would be called a "deep" copy, because it's going "deeper" into the structure, copying everything, not just the first "layer".
yes
You can convert a deep well jet pump to a shallow well jet pump by plugging the top three quarter inch opening, and drawing water in through the bottom one and a quarter inch opening.
It can be shallow or deep.
If shallow then it is mined using a "strip" mining technique. If it is deep then it is mined in deep mine collieries.
Deep frying
The difference between a shallow and deep foundation is very simple. A shallow foundation is not very deep and a deep foundation is.
is river godavari shallow or deep
If in shallow water, the plants that grow on the bottom, but if on deep water, on floating algae.
shallow frying means the food to be fried should not be completely dipped in oil while frying. For this, a flat pan is used rather than a deep bottom pan.
swamps are deep while marshlands are shallow
It is called a shallow or a deep painting. Shallow means it has light colors. Deep means it has contrast between light and dark such as shadowing.
one is deep, the other is shallow.