0
It could be a hangman's noose, a bowline, a bowline on a bight, a double bowline, an overhand bight, or any number of other knots.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can a valve be installed at the end of steam expansion loop?
Yes. The expansion loop is only there to take up the thermal expansion of the pipe run, installing a valve will not impede the action of the loop.
What is a metal rope called?
A metal rope is also called a wire rope.
What is a 'jackass rope'?
a tabacco rope
What is the hanging rope loaded apparatus?
hanging rope loading appratus
What is hysteresis loop in stress and strain?
the leading or lagging between the stress and strain is called hysteresis loop
What is daisy chaining?
Daisy chaining is when you tie up a rope a certain way for storage so that you will not damage the rope when it is not in use. You can make one by making a loop at one end of a rope, pulling a little bit of rope the the loop to form another loop, pull some rope through that rope to make another loop, and so on until the end when you pull the end of the rope completely through the last loop. If you do it right, you will be able to un-daisy chain the rope in one pull. The whole method is very convenient.
What is sailors eye?
A type of knot use to make a loop at the end of a rope. Made by unravelling the end of twisted multicord rope and plaiting the unraveld ends back into the rope.
What is a becket?
A becket is a short piece of rope spliced to form a circle, or a loop of rope with a knot at one end to catch an eye at the other end.
what is Becket?
A becket is a short piece of rope spliced to form a circle, or a loop of rope with a knot at one end to catch an eye at the other end.
What is a Liverpool splice?
It is a method of creating a loop at the end of a multi stranded rope
How many times was the rope wrapped around the neck of those hung?
The rope of the traditional hangman's noose made a single loop around the neck. The knot securing the loop included 13 wraps of the end of the rope.
How do you make a bowline on a bite?
1. Fold your rope in half. 2. Make a loop in one side of the rope. 3. Feed the other end through the loop. 4. Pull the pulled through loop over the top and behind the large loop. 5. Pull tight.
How do you keep the ends of a rope from separating?
try burning the ends of the rope * Added - Heating the ends of a polyester or Nylon rope is the most common method used, although it generally does not present a good appearance. For hemp rope or larger diameters of Nylon or polyester, whipping is the best method. However, you can purchase a whipping glue that you dip the ends in as well. Whipping is done by using a small line, usually of the same material as the rope being whipped. A long (4 to 5 times the diameter of the rope being whipped) narrow loop is made and laid on the rope end, loop facing away from the end. Then, very tightly, and beginning near, but slightly away from rope end, wrap the line around the rope, each turn alongside the one before it until you are near the narrow loop. Insert the end of the line into the loop. Now, pull the free end that is extending from underneath the turns you made, at the rope end. This wil pull the end of your line underneatht the tight turns, securing it. Trim both line ends and you're done and have a beautiful whipped rope end.
What is a noose?
A noose is an adjustable loop of rope, such as one you would use to hang someone, or at the end of a lasso.
How do you saflet tie up a horse?
Here is a step by step guide fora quick release knot... 1. You put the lead rope through the ring. 2. You take the end of the lead rope around the front of the rest of the lead rope to make a shape like the number '4'. 3. Put your hand through the loop and grab the end of the lead rope, but up a bit from the end. 4. You pull the rope through, but not all the way through, so that there Is a loop coming out oftheloop. 5. You pull the second loop and the end of the lead rope closest to the horse and there you go! Note: If you pull the end of the rope,the knot will come loose just like that! If you have a naughty horse who would pull the end and escape, you can put the end of the roop through the hook. Hope this helped, as I have 5 horses myself! :)
What is the device used to hang someone called?
The noose is the loop at the end of the rope which is placed around the victims neck, the actual rope is known technically as a ligature and the gallows is the platform.
Are there possible ways to find the perimeter of twenty-eight?
Yes.Take a long rope and make a loop so that the length of the rope around the loop is 28 units. Then put it on a flat piece of ground so that the rope does not cross itself. Any shape that it makes has a perimeter of 28 units.Yes.Take a long rope and make a loop so that the length of the rope around the loop is 28 units. Then put it on a flat piece of ground so that the rope does not cross itself. Any shape that it makes has a perimeter of 28 units.Yes.Take a long rope and make a loop so that the length of the rope around the loop is 28 units. Then put it on a flat piece of ground so that the rope does not cross itself. Any shape that it makes has a perimeter of 28 units.Yes.Take a long rope and make a loop so that the length of the rope around the loop is 28 units. Then put it on a flat piece of ground so that the rope does not cross itself. Any shape that it makes has a perimeter of 28 units.
