A minimum plain bore sprocket is a roller chain sprocket with a hole drilled through the center. A finished bore sprocket is a roller chain sprocket with a hole drilled through the center augmented by either a keyway or set screws.
Pipe bore is the actual minimum inside diameter of a pipe, which is not necessarily the nominal pipe size.
Socket weld joints are an easy and fast method of weld joints. Socket welding is preferred mainly on low pressure joints and small bore joints.
There is no minimum or maximum age
2,5m
Use full bore for applications where pressure drop should be minimum (such as in the suction pipe of a pump with required NPSH very close to available NPSH), or for pipes which could be cleaned with a pig (so that the pig doesn't get stuck on the valve). In other applications a reduced bore should be OK.
hangfire
A hangfire.
Most likely you still have the old silicone gasket stuck in the bore of the valve body. To remove it, use a 3/8" extension bar from your socket set. Insert it into the bore and tilt it. The gasket will come right out.
Plain black, Plain navy, Plain blue, Plain grey, black and grey tie die, and a maybe paysley. They also should extend of a maximum just below ankles and a minimum of 10-15 cm down from the hip.
Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]
It is bore da, pronounced phonetically "bore-eh daah"bore da