0
a number of drill is the number that is most dived
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
3 different ways drill bits are sized and numbered?
By drill code number, SAE size, metric size.
What size hole needs to be drilled for a number 6 screw?
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
What 2 Fraction Numbers make a Hole?
Fractions cannot make holes! Numbers are abstract concepts, they do not have the ability to drill through solid objects.
How do you drill into brick to attach address numbers?
Use a carbide bit in a drill. Then install plastic anchors where the screws go.
What is 4 inch drill pipe torque up to?
A 4 inch drill pipe torque is used for fishing in small casing.
3 different ways drill bits are sized and numbered?
By drill code number, SAE size, metric size.
What is the name of the machine a twist drill is used with?
A Twist Drill, could be used on a number of machines, normally a Drill Press, but also on either a Lathe or Milling machine. for certain applications.
What was the first song to enter chart at number one?
1892 ... "Drill, Ye Terriers, Drill" by George J. Gaskin (according to Billabong)
What size hole needs to be drilled for a number 6 screw?
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
What size is a number 40 drill?
A number 40 is 2.489 mm, or almost 1/10 of an inch.
What is a use for twist drill?
Drilling accurate sized holes in a number of materials.
Where does a squad leader assume his post when drill is a larger unit?
When the squad participates in a drill as part of a larger unit, you'll find the squad leader occupying the number one position, meaning the number one base position.
What is the MOS number for drill instructor?
there is no MOS #....it is a B billet which is separate from jobs in the fleet.
What is drill number?
Drill bits are sold in increments of 64ths, 32nds, 16ths, 8ths, ect. They are also sold in increments of "numbers" from 1 to ?. 1 being the small size.
What size is a number 25 drill bit?
It's 0.1160 of an inch, or a tiny,tiny bit less than 1/8 inch.
What is drill machnie?
A drill machine can mean a hand held electric drill, or a bench drill press or a pillar drill.
How big should you drill your electric chase?
Drill using a 280 degree drill by samsung drill and drill about 5cm by 5 cm
