I would say a power brake booster or a brake booster would be the same.
The brake booster is part of the power brake system.
The power brake booster of a vehicle is replaced by removing the fluid reservoir, unbolting the booster from the firewall, and disconnecting it from the brake pedal. A new booster can then be connected and bolted into place.
It's the "power" in your power breaks.
The power booster check valve would be located where the vacuum hose is connected to the booster. The vacuum hose is connected to the valve and the valve is inserted into the booster. They are usually made of plastic.
Power booster failure or vacuum supply to booster failure.
The power brake booster on a 95 Chevy Blazer is replaced by draining and removing the master cylinder, unbolting the booster, and removing it from the vehicle. A new cylinder is then put in its place and bolted on.
BAD power brake booster are a vaccum leak at the booster.
Yes.
No, the brake booster operates off of vacuum not electricity. If the booster isn't working then check the vacuum line going from the intake manifold to the booster. If the line is ok and not leaking then you need to replace the booster.
Sounds like it could be a vacuum leak at the power brake booster Check the lines to booster and the check valve at the booster Could be a defective brake booster also
need to find out how to replace a power brake booster in a 2002 Chevy silverado 2500 HD