Steam turbine is comprising of stages, number and size of the stages depands upon the break horse power of the turbine.
The stage has set of moving and fixed blades. The moving blades are attached to the rotor while the stationary blades is called Diaphragm.
The diaphragm guides the steam to glide over the moving blades for producing rotary motion.
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
That would depend on the type and size of turbine.
it comes from steam
Yes,the mechanical energy of steam can turn the shaft of a generator thru the steam turbine in which the steam acts on its blade to produce rotational motion to transform mechanical energy. Yes, the mechanical energy of steam can turn the shaft of a generator thru steam turbine as the driver, because the steam will acts on the tubine blade to produce rotational motion to transform mechanical energy and elctrical energy as well.
It creates heat, heat boils water in closed boiler into pressurised steam, expanding pressurised steam drives steam turbine blades, steam turbine drives generator creating electricity, electricity powers metro system
Lp turbine diaphragm breaks due to positive pressure inside the condenser because of steam expansion.
Why extractions are taken out from steam turbine.
becouse this steam is use repetdly for the turbine
The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.
manish
Rankine cycle is used in steam turbine
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
why we are maintain vacuum in steam turbine at steam outlet or exhaust side
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.
inconsistent load will cause steam turbine hunting.
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
Depends on the turbine