0
What else can I help you with?
What would cause the AC on a 1996 Rav4 to stop cooling after 5 minutes of operation?
pressure switch
How do you fix the rear stop lights on a 1996 Chevy Lumina the stop lights only work when the turn signal is on?
Possible bad stop light switch located near the brake pedal.
What would stop the ac compressor from turning on in a 1996 Pontiac Sunfire?
low freon, bad pressure switch, bad compressor clutch.
Is a stop switch wired in series?
A stop switch is wired in series with the power supply and the load.
What is a stop light switch?
It is the brakes light switch
What would cause blinkers on a 1996 dodge ram to stop working even though the fuses and the hazards work and replaced the flasher fuse to?
I have a 1996 D R and have the same problem. Apparently the flasher switch needs to be replaced.
Where is the stoplight switch on a 2002 Chrysler Sebring sedan?
The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.
Why would the Driver side door power window switch stop working on a 1996 GMC Suburban K1500?
Bad switch? Bad motor? see if you are getting power to it Open wire usually found in door jamb area
What is the function of a stop switch in a motorbike?
The function of a stop switch is to cut the ignition so the engine can stop. If the switch is in the off position and the engine isn't running, then to start the bike you'll have to put it to the on position.
How do you replace the stop light switch on a 97 Avalon you already bought the part you need help getting the one that in there out?
The 1997 Toyota Avalon stop light switch simply plugs in and out. Take hold of the stop light switch and pull outward. Plug the new stop light switch in.
How do you wire up the stop switch on a Yamaha 15A 15hp outboard?
To wire up the stop switch on a Yamaha 15A 15hp outboard, locate the stop switch terminals on the engine's wiring harness. Connect one terminal of the stop switch to the kill switch wire, and the other terminal to the ground or the engine block. Ensure all connections are secure and insulated to prevent corrosion. Test the switch by starting the engine and then engaging the stop switch to confirm it halts operation effectively.
1996 jeep brake lights stay on after parking?
Check the operation and/or alignment of the stop light switch usually located at the upper end of the brake pedal under dash area
