Spring steel
A torsion bar is used in an auto suspension. A torsion bar suspension, also known as a torsion spring suspension or torsion beam suspension, is a general term for any vehicle suspension that uses a torsion bar as its main weight bearing spring. One end of a long metal bar is attached firmly to the vehicle chassis; the opposite end terminates in a lever, the torsion key, mounted perpendicular to the bar, that is attached to a suspension arm, a spindle, or the axle. Vertical motion of the wheel causes the bar to twist around its axis and is resisted by the bar's torsion resistance. The effective spring rate of the bar is determined by its length, cross section, shape, material, and manufacturing process.
there is not one a torsion bar suspension is a cheap lift. i have one on my truck and i am currently looking into a suspension lift for mine. i suggest you do the same.
The 1st generation Nissan Pathfinder, 1987 - 1995 had a torsion bar suspension on the front end of the vehicle. There is a driver's side and passenger's side torsion bar and they are not interchangeable. 1996 - 2009 models do not use a torsion bar.
No, it would have coil springs.
www.106owners.co.uk
To change the torsion bar on an Iveco Daily you need to pick up the frame and take off the suspension. At the end you will see the torsion bar which can be rotated and removed. Then. a new bar can go in its place.
The Torsion bar is a suspension component. It essentially "twists" ever so slightly to adjust ride height. This is adjusted by a special tool specific to the manufacturer.
Torsion bar
A sway bar is a torsion bar mounted laterally on a suspension and is designed to reduce side sway. The sway bar attempts to accomplish this by transferring movement from one side of the suspension to the other. This is done through the connection of a torsion bar to each side of an axle by flexible links. (Sway bar links)
Coil springs. Leaf springs. Torsion bar.
A torsion bar lift kit will normally cause the vehicle to write a little rougher. The vehicle suspension will not absorb bumps as well, as it did.
Instead of using coil springs on the front suspension torsion bars are used from the lower control arms to the frame ( my 1995 Ford Explorer 4x4 has torsion bars , my dads 73 Dodge Coronet had torsion bars ) If you look at a lower front suspension that has torsion bars you will see the torsion bars going from the lower control arms rearward