answersLogoWhite

0

What is a transfer case for bravada?

Updated: 12/2/2022
User Avatar

Wiki User

10y ago

Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is a transfer case for bravada?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the transfer case on a 2000 Oldsmobile Bravada?

It is under the car behind the tranny


Is there a known issue with the 2002 Bravada's Smarttrac?

Encoder motor (transfer case motor) needs to be replaced it is on the transfer case. the gears strip out inside it, or the shaft breaks. you can get them on e-bay. really easy to change.


What type of fluid do you put in a 2001 Bravada transfer case?

After lots of reading to find out what my Transfer-case problems were for my 02 Bravada. I read lots of posts on Bravada Transfer-cases problems which could be solved or prevented by using the correct BLUE fluid (TrackII ?) So to save having any problems with my new Transfer-case I bought the Blue Fluid from the dealer and filled it up. I am not sure if you can get it from anywhere else but to save having to buy a new Transfercase ($5,000.00 + Installation) you should go to the dealer and check if you need that Blue fluid as well. Oh and there is nothing wrong with buying your Transfer-case and Encoder Motor from a Junkyard or EBay. After installing a used transfer-case and new Encoder Motor with my Brother(we are not mechanics) it cost under $1,000.00CAD.


Where is the TCCM Fuse on a 1999 Bravada?

The TCCM (Transfer Case Control Module) fuse on a 1999 Bravada is located in the engine compartment fuse box. The TCCM is located in the dash on the driver's side to the left of the steering wheel.


Where is the speed sensor on a 2000 Olds Bravada Smartrak and how hard is it to change?

The speed sensor on a 2000 Olds Bravada Smartrak is on the top of the automatic transfer case. To change it you need to disconnect the two wires and replace with a new sensor.


Why wont the awd engage on bravada?

i just took my 2002 bravada into the shop and had a friend look at it and he hooked it up to the computer and said that the transfer case encoder motor was bad. its the mechanism that switches it from 2wd to awd. i will be doing it myself. its an easy fix but will set you back around 150$ its a few bolts and a plug. it mounts onto the back of your transfer case. good luck.


2002 bravada won't shift into all wheel drive?

i just took my 2002 bravada into the shop and had a friend look at it and he hooked it up to the computer and said that the transfer case encoder motor was bad. its the mechanism that switches it from 2wd to awd. i will be doing it myself. its an easy fix but will set you back around 150$ its a few bolts and a plug. it mounts onto the back of your transfer case. good luck.


How much fluid to put in a 1998 bravada transfer case?

Fill it till it runs out of the fill hole. Again that's the FILL HOLE, not the DRAIN HOLE. They are separate.


Why wont my bravada disengage from all wheel drive?

not 100% sure about yours but i just took my 2002 bravada into the shop and had a friend look at it and he hooked it up to the computer and said that the transfer case encoder motor was bad. its the mechanism that switches it from 2wd to awd. i will be doing it myself. its an easy fix but will set you back around 150$ its a few bolts and a plug. it mounts onto the back of your transfer case. good luck.


Where is actuator motor in all wheel drive bravada?

Located in the transfer case. You need to remove front driveline, then remove three bolts holding motor. Pretty simple job.


What does the transfercase motor do for a 1998 Oldsmobile bravada?

Any tansfercase motor is to switch from 2 wheel drive to 4 wheel drive. It is located behide the transfer case and it has 6-7 wire plug. Only automatic push button 4 wheel drive trucks have the transfer case motor.


Where is actuator motor in all wheel drive Oldsmobile Bravada?

Located in the transfer case. You need to remove front driveline, then remove three bolts holding motor. Pretty simple job.