A wiper cowl is something I'm trying to figure out.
Through the wiper cowl at the pass side of the windshield.Through the wiper cowl at the pass side of the windshield.
The air is pulled in through the wiper cowl screen.The air is pulled in through the wiper cowl screen.
It comes through the wiper cowl on the passenger side.It comes through the wiper cowl on the passenger side.
You will need to raise up the driver side wiper once the hood is opened.On the freestar the cowl is being held on by pushpins rather than screws on the top cowl cover.On the bottom cowl cover there are screws on the right and left, but the windshield wiper mechanism is also attached to the underside of the lower cowl panel on the drivers side, so you will need to disconnect the wiper hose and electrical connector to completely remove the cowl; leave the wiper assembly attached to the cowl.
remove wiper arms and cowl
Remove the wiper arms first. Then remove the torx screws that hold the plastic cowl in place.
If equipped, there is a door in the wiper cowl, base of the windshield, passenger side.If equipped, there is a door in the wiper cowl, base of the windshield, passenger side.
Under the cowl (where the wiper arms go in)
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
The wiper cowl is the area at the base of the windshield that houses the wiper motor.