The 4JX1 engine torque rating is 333Nm (246 lb/ft) @ 2200rpm.
if its 4jx1 engine then you will need 5w40
there are 69 pins in a 4jx1 ecm. i think its hard to write it all don here. i have a manual here that illustrate all the pin outs of the ecm. for the person who ask this question, please send me your email add at iayanent@yahoo.com and I'll share the manual with you.
It does not have EGR.It does not have EGR.
The EGR sensor is part of the EGR valve on the rear pass side of the engine.The EGR sensor is part of the EGR valve on the rear pass side of the engine.
It doesn't have an Egr valve.It doesn't have an Egr valve.
Plugged EGR passage which restricts the flow of exhaust gasses, faulty EGR solenoid, faulty EGR solenoid wiring/harness, vacuum lines damaged or disconnected to the EGR valve solenoid or to the EGR valve, or a faulty EGR valve.
Yes, the EGR valve, or port EGR
no egr on b20 engine
EGR sensor ( gas temperature sensor ) is monted near the EGR valve, which is install into the EGR tube.
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
It does not have EGR.