0
You can find information on bernina sewing machines at the bernina site. The #2 foot is an overlook foot. The link below provides more information.
http://www.berninausa.com/product_detail-n25-r-i160-sUS.html
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the Age of a bernina sewing machine serial number 530-2?
it was made in 1960
What is the difference between the bernina 530 and the 530-2 sewing machines?
The 530-2 had additional embroidery designs and most importantly it added the blind stitch which the 530 did not have.
Does a Columbia 420-2 sewing machine have a walking foot?
Only miley has a walking foot in her butt
How were the early sewing machines powered?
They were powered by handANS 2 -Many early sewing machines were powered by foot. Your feet worked back and forward on a 'treadle' at the base of the machine.
Are there any table mounted sewing machines?
The Classic Singer 201-2 Vintage Sewing Machine is one of the oldest sewing machines. This model is simply a Singer 201-2 with an added knee lifter for the presser foot. which was mounted in a commercial table. There aren't very many sewing machines mounted to the tables themselves but the presser foot.
Where are Janome sewing machines made?
Bernina. if you buy a genuine Bernina it will be the last machine you will ever need. i am a sewing machine mechanic and i work on all brands and i quilt as well as sew all my own clothing. i have owned and sewed on all the brands. has the most precise stitch and there machines have the leased amount of breakdowns or problems. if you buy a cheap singer or other junk you can find at Walmart you will have so much trouble you will end up hating sewing and you wont realize its just your machine that sucks. ++++++++++++++++++++ I tend to agree to some degree. I too have a Bernina, but I also own 2 Viking sewing machines ( one for working with leather, and one for working with very heavy fabrics, such as denim or canvas. I also own a Pfaff which is VERY good for quilting. I have thrown out numerous other makes and models. Though I WILL keep my old Singer treadle. : }
What are some of the tools used when sewing and what are they used for?
Here are some of the sewing tools used: 1. A Seam Gauge (used for measuring seams) 2. A Seam Ripper (used to take out incorrect stitching) 3. Pins (used to hold fabrics in place when sewing) 4. Scissors (used to cut fabrics and patterns-make sure you have a sharper pair used only for cutting fabrics...scissors used on paper will hurt your fabric) Here are some of the sewing tools used: 1. A Seam Gauge (used for measuring seams) 2. A Seam Ripper (used to take out incorrect stitching) 3. Pins (used to hold fabrics in place when sewing) 4. Scissors (used to cut fabrics and patterns-make sure you have a sharper pair used only for cutting fabrics...scissors used on paper will hurt your fabric)
What was Rosa parks 2 favorite hobbies?
bungie jumping and sewing
What is 2 foot by 2 foot by 4 foot what is that in centimetres?
2 ft x 2 ft x 4 ft is equivalent to approximately 60.96 cm x 60.96 cm x 121.9 cm
2 names used to brake not used by foot?
Emergency Brake, Parking Brake
Which sewing machines are good for jeans?
A sewing machine with at least a 2 hp motor is suggested for denim.
How do you attach a vertical needle zipper foot to a Singer sewing machine?
To do this, you must not only take off your regular presser foot, but take of the part directly above it. You must loosen the presser foot screw, and take everything off below it. Then, look for a part on the zipper foot that hooks around a little. Put that where the original presser foot and the "presser foot holder" was. Then tighten the screw. 1=Loosen the presser foot screw. 2=Remove the presser foot and the part that the presser foot snaps in and out of. 3=Find the hook-like part, the same as on the presser foot holder, and put it where the other one originally was. 4=Tighten the presser foot screw. 5=Put the zipper foot down. It should be a little bit higher than touching the sewing machine. 6=To move the zipper foot from left or right, loosen the screw in the back of the presser foot, and slide the foot from side to side! Then tighten the screw again!
