0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is bit slicing concept?
Taking a repetitive multiple bit logic circuit and grouping one or more bits of the complete circuit into individual packages, creating identical slices through the logic. Although this can be done with any logic circuit, it is most commonly associated with computer CPUs: ALU bit slices, sequencer bit slices, etc. Although the term is most closely related to certain microprocessors of the 1970s and 1980s, the design practice goes back to the earliest vacuum tube computers including the ABC (ALU was 30 one bit slices of adder/subtractors) and the ENIAC (each accumulator was 10 one decimal digit bit slices of ring counter). Even a simple four bit latch chip can be considered a bit slice of a larger latch.
What is meant by flip flops and latches?
Flip flop is a combinational logic circuit. It is defined as an one bit memory devise.
What is business logic and presentation logic in java?
business logic ....refers to the domain specific logic rules,proc,and processes presentation logic......concerned with how objects are displayed to the user of the software
How is c language different from fuzzy logic?
fuzzy logic is a logic which we have to implement in c language
What are the characteristic of logic?
The only charateristic of logic is consistency.
What is STD logic in vhdl?
In VHDL, std_logic is a data type. It is assigned to input and / or output variables. It means that the variable is a standard logic type i. e. a logic bit which accepts or provides one bit data, either 1 or 0.
What the OR gate?
an unconditional addition operation performed for logic to transfer a particular bit is called OR gate
Where is the Vocoder In Logic Studio Logic Pro 8?
Its a bit to explain. I found out through this youtube vid, it was very helpful. http://thestudiofiles.com/?p=278 Good luck!
Is a bit is every pulse in a digital signal?
A bit is an on or off; (high or a low ; one or zero, depending on the logic.) A string of bits might be seen as "one pulse", but it is the bit Rate which must be considered.
How many logic gates are needed to build the 4 bit carry-lookahead adder?
10 ANd and 4 Or gate..
What is bit slicing concept?
Taking a repetitive multiple bit logic circuit and grouping one or more bits of the complete circuit into individual packages, creating identical slices through the logic. Although this can be done with any logic circuit, it is most commonly associated with computer CPUs: ALU bit slices, sequencer bit slices, etc. Although the term is most closely related to certain microprocessors of the 1970s and 1980s, the design practice goes back to the earliest vacuum tube computers including the ABC (ALU was 30 one bit slices of adder/subtractors) and the ENIAC (each accumulator was 10 one decimal digit bit slices of ring counter). Even a simple four bit latch chip can be considered a bit slice of a larger latch.
What is meant by flip flops and latches?
Flip flop is a combinational logic circuit. It is defined as an one bit memory devise.
What is logic to find the even and odd no without use of modulus and division?
If you're using C, just check the low order bit. In binary, the low order bit of an odd number is 1, and the low order bit of an even number is 0.
Can all computations and logic operations including Boolean logic be broken down and equated with elementary arithmetic?
They can all be broken down to three basic operations: AND, OR and NOT. It is also possible to break them down to a single operation, for example NAND (= NOT AND), but this is a bit confusing.
Is logic an art?
Logic is not typically considered an art but rather a discipline or system that deals with the principles of reasoning and critical thinking. While some aspects of logic may involve creativity and problem-solving, it is more commonly viewed as a science or a tool for analyzing arguments and drawing valid conclusions.
What are the Protocol for 8 bit data transfer through DB 9 connector?
Data transfer through a DB 9 connector is done with a serial protocol.At its simplest, there is a transmit pin, a receive pin, and a ground pin. There are other pins, such as Clear-To-Send and Data-Terminal-Ready, but they don't factor into the specific question at hand.Voltage levels are RS-232C, which means that logic one is -3 to -15 volts, and logic zero is +3 to +15 volts. At a mutually agreed rate, called bits per second (somewhat incorrectly called baud rate), the data is transmitted one bit at a time. There is a start bit, logic 0, followed by the 8 bits, high order bit first, followed by a stop bit, logic 1. The receiver senses the leading edge of the start bit, and starts measuring time so it can sample the data bits in the vicinity of the middle of the bit.Sometimes there is a parity bit, between the last bit and the stop bit, which can help verify correct reception of the data byte. Sometimes, at 110 bits per second, the stop bit is 1.5 bit cells wide. (110 bits per second is obsolete, used for teletypes - more commonly, the data transfer rate is much higher, such as 19,200 - 38,400 - 76,800 - etc.)
What are the blocks in logic gates?
The blocks in a logic gate depends on the logic family we use.A logic gate is designed using a specific logic family. The logic families can be DTL, TTL, CMOS etc.The blocks are different for different logic families.The various blocks in various logic families are:Diode logic: diodes and resistorsDTL logic : diodes and resistorsTTL logic : transistors and resistorsNMOS logic: only NMOS FETsPMOS logic: Only PMOS FETsCMOS logic: Both NMOS and PMOS FETsBiCMOS Logic: both transistors and FETs.
