Tolerances for Modulus have to be based on the actual fabric style specification sheet.
BOW AND SKEW (BIAS)--DEFINITION AND MEASUREMENTS
Definitions:
· Bow - A fabric condition resulting when knitted courses are displaced from a line perpendicular to the selvages and form one or more arcs across the width of the fabric (see Fig. 1).
· Skew (Bias) - A fabric condition resulting when knitted courses are angularly displaced from a line perpendicular to the edge of the fabric (see Fig. 2).
Measurement Method
· Bow - A straightedge is placed across the fabric between the points at which a marked filling yarn or knitting course meets the two selvages or edges. The greatest distance between the straightedge and the marked filling yarn or course is measured parallel to the selvages (Fig. 1 Distance "D").
· Skew or Bias - Measure the skew in three places spaced as widely as possible along the length of the fabric or along a minimum of 1 linear yard. If possible, make no measurement closer to the ends of the roll or piece of fabric than 1 yard. Draw a line perpendicular to the selvage across the fabric from a point C where the marked yarn or course meets one selvage, meeting the other selvage at point B. Measure the distance between points A and B or D and B, and B and C, as shown in Fig. 2. Record the three or more skew or bias measurements. Calculate the maximum skew or bias as a percentage of the fabric width using the equation:
"% Skew = Distance AB or DB x 100 / width BC"
GIHAN RANGAN_JINADASA GROUP _SRILANKA
how to get the percentage of bowing fabric
Bowing refers to the Defect which relates to the placement of any object Non parallel to the straighten yarn in cloth structure.
P. Stacey has written: 'Bowing and creasing of weft knitted fabric'
Bowing out means to leave and bowing out for life means to leave something permanently.
bowing culturaly u idiot what else would it be...god ur stupid
A bowing fracture is a fracture that only happens in children where the bone bends but does not break.
These are the basics on how to control the intensity of the sound of a violin:Lighter bowing = lower intensityHeavier bowing = higher intensityLonger bowing = louder soundShorter bowing = quieter soundRemember that you can use combinations of these basic techniques to achieve different levels of sound and intensity.
3 in
Phobobowia. :)
by bowing
i am working
When you get on one knee and pray.