Caulking is a term used to describe several different process to seal joints or seams in various structures and certain types of piping. The oldest form of caulking is used to make the seams in wooden boats or ships watertight, by driving fiberous materials into the wedge-shaped seams between planks. A related process was formerly employed to join sections of cast iron sewerage pipe. Caulk (calk) can refer either to the caulking substance or to the process of applying it. Caulking as a term has spread to the building trade, meaning the activity of closing up joints and gaps in buildings. The function of caulking is to provide thermal insulation, control water penetration and noise mitigation. This is mostly done with ready-mixed construction chemicals sold as caulk such as silicone, polyurethane, polysulfide, sylil-terminated-polyether or polyurethane and acrylic sealant.
A caulking gun.
Europe
no.
It's usually called a caulking gun. Google it and you will see tons of photos. The caulking tube fits in it so you can dispense the caulk.
pull it out
As in, he took a caulking gun that contained a substance know as puddy, and applied it around the windows to keep out the draft of cold air.
Hardware store-comes in a tube for use with a caulking gun.
Caulking guns are used to fill in cracks around windows and bathtubs. This fills in the cracks and prevents water from getting in as the caulk is water resistant.
I believe that you mean acrylic caulking, not latex. In any event, not all brands are the same; sometimes there is an inner seal of aluminum foil that you have to puncture before you can extrude the caulking compound, but usually there isn't. You slice off the tip of the tube, and since the tip is tapered, you get to choose the side of the opening that you want, for heavy caulking or light caulking. Then put the tube in your caulking gun, to squirt out the caulking compound. If you don't have a caulking gun, you can still push on the plate in the back of the tube, the opposite end from the one you sliced open, with the handle of a hammer. The caulking compound comes out, you put it where you want it, and smooth it into place, using a finger tip. Acrylic is perfectly safe to touch, because the solvent is just water. Silicone caulking compound (which uses acetic acid as a solvent) can give you a blister if you have excessive skin contact, so you would use something else than a bare finger tip.
Using a caulking gun would work. Just buy waterproof caulk!
I believe that you mean acrylic caulking, not latex. In any event, not all brands are the same; sometimes there is an inner seal of aluminum foil that you have to puncture before you can extrude the caulking compound, but usually there isn't. You slice off the tip of the tube, and since the tip is tapered, you get to choose the side of the opening that you want, for heavy caulking or light caulking. Then put the tube in your caulking gun, to squirt out the caulking compound. If you don't have a caulking gun, you can still push on the plate in the back of the tube, the opposite end from the one you sliced open, with the handle of a hammer. The caulking compound comes out, you put it where you want it, and smooth it into place, using a finger tip. Acrylic is perfectly safe to touch, because the solvent is just water. Silicone caulking compound (which uses acetic acid as a solvent) can give you a blister if you have excessive skin contact, so you would use something else than a bare finger tip.
A caulking gun helps to extrude the caulk from a tube. If you are using it in a bathroom, make sure that it is mildew resistant and is silicon. Place the tube in the gun. First pull out the rachet, fit the tube inside and then return the rachet until it is tight. Cut off the tip of the nozzle to the right size of "bead" that you want. Squeeze the trigger and the caulk should start coming out.