Want this question answered?
The Nyquist Therorem states that the lowest sampling rate has to be equil to or greather than 2 times the highest frequency. Therefore the sampling rate should be 400Hz or more.
if the sampling rate is twice that of maximum frequency component in the message signal it is known as nyquist rate
>8000hz
The sampling rate must be at least double the highest frequency component of the modulating signal in order to avoid frequency aliasing.
Sample Rate. Good Luck @ Full Sail!!
It depends to the acceptable risk level in your company. Usually AFR=10 is acceptable in most companies.
A lower accident frequency rate is better as "frequency" means "how often something occurs".
accident frequency rate = accidents with lost time x 1.000.000 / manhours worked
I Din't Know
30
Number of accidents divided by time.
An accident frequency rate is the number of accidents that occur within a specific company during a defined time period. This rate is often used to find areas within the company that require improvement in safety standards.
fatal accident rate is number of fatal accidents x 100,000 divided by the total hours worked. Accident incident rate is the total number of accidents x 100,000 divided by the total hours worked. accident severity rate is the total days lost x 1,000 divided by the total hours worked
500 manpower X 40 hours a week X 50 weeks per year = 1000000
The frequency of a wave is always equal to the rate of vibration of the source that creates it
The rate of vibration is called the frequency.
FREQUENCY=11996 MHz SYMBOL RATE=H POLE RATE=27,500