At normal temperature and pressure, both are solid.
Salt is soluble in water, sand is not soluble; filter the solution.
To recover pure common salt from a mixture of sand, common salt, and ammonium chloride, I would first dissolve the mixture in water, allowing the common salt and ammonium chloride to dissolve while the sand remains insoluble. Next, I would filter the solution to separate the sand from the salt solution. Then, I would gently heat the salt solution to evaporate the water, leaving behind pure common salt as a solid residue. The remaining ammonium chloride can be removed by sublimation if needed, but this step is optional depending on the desired purity.
sand+salt=sand salt
Salt is soluble in water.Sulfur is soluble in carbon disulfide.Sand is insoluble.
Because it is made up of small, solid particles.
You can separate common salt and sand by dissolving the mixture in water and then filtering the solution. The salt will dissolve in water, while the sand will remain as a solid. Next, you can separate the sulfur from the remaining mixture of sulfur and sand by using a magnet since sulfur is weakly magnetic.
Mix the sand/salt mixture with distilled or deionized water, which should dissolve the salt. Then pour the whole thing through piece of filter paper. The salty water will go through the filter, while the sand will be caught. Boil off the water to recover the salt.
Well, sugar, of course table salt and sand can be separated! All you gotta do is pour some water over the mixture and watch the salt dissolve like it's nobody's business. Then just strain out the sand like you're sifting through a messy breakup. Easy peasy, lemon squeezy.
1. Put this mixture in water and stir. 2. Filter the suspension on paper filter or other type of filter. 3. The sand remain on the filter and the salt in the filtrate.
Salt and sand is a mixture.
You can dissolve the sand and salt into the water. when this happens the salt will be dissolved and the sand will stay at the bottom. then get some filter paper and pour the mixture through it. the dissolved salt and water will go through leaving the sand. there you have the sand aside. to get the salt aside just boil the water until it evaporates completely and you will be left will your salt. then you have your sand and salt separated. by sifting it
You toss the sand and salt in a filter that will not allow the sand through, Then rinse the sand with clean water until all of the salt has been dissolved and removed from the sand, Then evaporate the water and you will have the salt separated from the sand.